Dexter Brakes

[Iowachild]

On the back of Dexter trailer brakes there is a nylon wire tie the pushes into the back plate. Does anyone know of a source for the ties? Thank you!

 

[Diamondpilot]

I have seen something similar at Napa. They are pricey and are a conventional zip tie with a push in pin. What I do is get some body push in pins and drill a hole in them then just use a standard zip tie.

Chris

 

[Soundguy]

some electrical supply houses sell zip ties with a provision for a push pin.. though hard to find and expensive, and usually has to be bought in bulk / multi packs..

soundguy

 

[oldballs]

Maybe try the trailer manufacturer. I've found mine to be quite helpful when needing advice or parts.

 

[tommu56]

I drill another hole and loop the tie wrap back through.

tom