demolition hammer

[swick1]

Check out this patent: Demolition hammer

Sheet 4/5 shows a model that should be easy for any of us to build and it would sure save my back! I contacted the company about buying one for a 260 backhoe and they didn't have anything that would fit. I ordered the information video which showed that it would work pretty well. If I modified the hammer to have a conical shape at the end it would probably work even better. I think this will be another project for me to do this winter.

Full Patent: Demolition hammer - Lindsey, Edgar F.
Website: Universal Impact Technologies - Serious Equipment for Serious Work

 

[Taylortractornut]

Ive actually run the Universal Impact Technology Powersledge before a good bit. I worked for a company that had some that we used for bridge decking and slabs and other concrete. They work pretty good, We had one that attached to a Bobcat QT. It was a bit awkward on the foot controls. We had an older on that had a hinged pole with a hammer on the end with a cylinder that was attached with a cable. It would pull it up and tilt the QC back and then run the cylinder back out. Then tilt it forward and let it fal lto te ground It worked well on the loader.