DEERE 4720 Cab pics

[KB9UDE]

Well the mean reason is I live on the other side of a tunnel. I would need to drive it in and out with out taking it on and off the trailer every time. The tunnel is 11ft 2in.

OUCH!! That might be pushing it...You might need to look into a regular car hauler style trailer vs a deckover like mine. You can get them in a GN or bumper pull.

 

[jenkinsph]

You can haul the 4720 on the BigTex trailer or similar trailer. Total height should be just shy of 10ft.

 

[KB9UDE]

Yes Steve is about right on height. Deckovers are nice and wide but can cause problems with height.

 

[landscapebear]

Thanks, I may need to look in to a car hauler trailer. The deck over was looking good for loading pallets and unloading easyer. as well as trees and stuff. Any one have a backhoe on there 4720? how easy really is it to take on and off.

 

[KB9UDE]

I had a 3320 with 448 hoe a few years back. It was a 10-15 minute job to remove or install. 3pt arms had to come off with a few pins. Not bad at all.

 

[jenkinsph]

Landscapebear,
PJ trailers makes a tiltbed 14,000 lb 20' trailer with a fixed 4' front section and 16' tilt section (model T6 IIRC) that might be just the ticket for your uses. At roughly 3500 lbs. you still have a 10,500 lb payload capacity and the entire trailer is powdercoated too.