Just trailered my tractor home last night and this morning I went to drive it off the trailer and it won't start. It spins over just fine, so I assuming something fuel related, any ideas on where to start? The seat switch clicks, etc when pressed.
Deere 4400 wont start
- Thread starter Tritonman
- Start date
- Views: 2565
-
- Tags
- john deere 4400
JohnDeere4300
Veteran Member
Did you try putting in a jumper-wire on the switch ?
atschirner
Silver Member
I'd look at the fuel shutoff circuit. Is the arm at the injection pump moving when you turn the key to "on" and staying in when you turn the key to "start"? Could this be the famed thermistor bounced out of its socket from the trailer ride?
Please let us know what you find. I might need your info for my 4400 some day.
Please let us know what you find. I might need your info for my 4400 some day.
kennyd
Advertiser
My bet is on the thermistor...
kennyd
Advertiser
What switch? It is cranking over so it would not be one of the safety switches...
JohnDeere4300
Veteran Member
When my seat switch went bad it would crank but not start... I could push down on the switch, or moves the wires around going to the switch, and then it would start.
kennyd
Advertiser
Wayne_H
Gold Member
- Joined
- Dec 16, 2004
- Messages
- 380
- Location
- Davidsonville, Maryland
- Tractor
- John Deere 4400, '48 B and 318
My 4400 starts fine with me out of the seat. As soon as I touch the trans though it stalls unless I am in the seat. If I try to engage the PTO when I am not in the seat and the parking brake is not engaged it will quit. If I am off the seat, parking break engaged, I can engage the pto.
So... Not sure your starting issue has much to do with the seat switch!
Wayne
So... Not sure your starting issue has much to do with the seat switch!
Wayne
