Dang remote connections!!

[Rio_Grande]

I have an international 574. It has the factory remote connection on the back. I have picked up several male ends in an atempt to find a set that wil fit but nothing will connect to what I have.

The reciever end is just a large circle with ball bearing retainers. I am about to give up for lack of finding anything that will connect my log splitter to the tractor.

 

[SLHawkins]

I have an international 574. It has the factory remote connection on the back. I have picked up several male ends in an atempt to find a set that wil fit but nothing will connect to what I have.

The reciever end is just a large circle with ball bearing retainers. I am about to give up for lack of finding anything that will connect my log splitter to the tractor.

Take the ends off the tractor to tractor supply or NAPA and try the ends until you find a match. Do you have a dealer near you? Or, do you have another implements with ends that do fit? If so, just switch 'em.

Hawk

 

[kennyd]

Take a picture and some measurements, then post back. Someone here can help:thumbsup:

 

[J_J]

Look on the QD for some numbers and search the net for a match or just replace with a new set to match all your implements.

Surplus Center

Quick Disconnects > Discount Hydraulic Hose.com

 

[DJNebraska]

Rio...

Could it be this?

Hydraulicstore.com - Old International Harvester Male to Pioneer Female

This will allow you to plug into the old IH and use standard Pioneer style tips.

 

[DJNebraska]

Or if you just want the tips and not the adapter...

Hydraulicstore.com - International Harvester Tip with 1/2" Pipe Threads

Hydraulicstore.com - International Harvester Tip with #10 Female O-Ring

Both of these will fit the old style IH casting...so will the adapter mentioned before.

 

[J_J]

Here is a QD interchange.

ISO 5675 Agricultural Hydraulic Quick Disconnects

http://www.jgbhose.com/Data_Returns/byCouplingName.asp