Rake Cylinder Angle Bracket for Woods Landscape Rake LR700

   / Cylinder Angle Bracket for Woods Landscape Rake LR700 #1  

LouieJunior

Platinum Member
Joined
Mar 17, 2012
Messages
500
Location
Moline, Illinois
Tractor
JD4052R Open Station
I wish to add a hydraulic cylinder to my Woods LR-700 Landscape Rake. I have everything except part 20453, which is the mounting bracket for the hydraulic cylinder. Woods no longer has this part and I have been unable to locate one.

Before fabricating something to work I thought I'd ask if there are there any other Landscape Rakes or Rear Blades that use a similar type bracket? Unfortunately, I am not a welder. I posted this in hydraulic section earlier.

Woods LR700 Hydraulic Angle Bracketl.jpg
 
   / Cylinder Angle Bracket for Woods Landscape Rake LR700 #2  
A welding shop should be able to build you the bracket. You may have to bring them the rake and drawing so they can make measurements. Make sure they put the rear cylinder mount at the same height as the rod cylinder mount on the rake, so it does not bind.
 
 

Tractor & Equipment Auctions

378487 (A51573)
378487 (A51573)
(1) HD 24ft Free Standing Corral Panel (A51572)
(1) HD 24ft Free...
FAKE (A52472)
FAKE (A52472)
2004 FORD F-650 SUPER DUTY DUMP TRUCK (A51406)
2004 FORD F-650...
Payment Terms (MUST READ) (A50775)
Payment Terms...
2014 716PT Homesteader 7'x16' Box Trailer (A52384)
2014 716PT...
 
Top