TSO
Elite Member
Dragging does not necessarily work better than pushing
CUT vs Skid Steer
- Thread starter PJSprog
- Start date
- Views: 24776
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,283
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Yep, with a front mount, you are driving a on smooth flat surface when pushing.
And you can also pull it in reverse and use the rippers if needed.
TSO
Elite Member
Yes and with front mount, you also have down pressure, not like rear implements that are weight driven only. (Unless you step up to bigger industrial units)
joeu235
Platinum Member
- Joined
- Mar 27, 2014
- Messages
- 724
- Location
- Little River, TX
- Tractor
- John Deere 4020 / 6403 / 317 Ford 5600
A used skid steer is more bang for the buck. Used 2007 JD 317 with 1800 hours cost me $14,500. I'm looking for a used tractor of comparable HP and the prices are $5k more.
Skid steer is terrible in a bumpy pasture & good attachments are twice as expensive. Is great at digging post holes, brush hogging in the thickest stuff, clearing land, moving dirt
Tractor is far better at "farm" work like plowing an making hay. Bucket is way out front and hard to see.
If I were to only have 1 I'd get a tractor.
Skid steer is terrible in a bumpy pasture & good attachments are twice as expensive. Is great at digging post holes, brush hogging in the thickest stuff, clearing land, moving dirt
Tractor is far better at "farm" work like plowing an making hay. Bucket is way out front and hard to see.
If I were to only have 1 I'd get a tractor.
stlbill
Silver Member
How do you pitch a box blade to make a ditch when mounted to a front end loader?
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,283
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,782
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
YOU ARE KILLING ME WITH YOUR GREAT TOYS!!!!!! :laughing:
Ryansweatt2004
Gold Member
Piston
Elite Member
That tit tach is pretty awesome. And, it should be for $3k just for the ability to tilt.
If money were no object, I'd definitely have a brand new Skidsteer with all the attachments, and probably one of those uber cool telehandlers as well.
However, looking at the prices for skidsteer attachments, I'd only be able to afford one or two.
See here for some examples. Skid Steer Attachments - Everything Attachments
If money were no object, I'd definitely have a brand new Skidsteer with all the attachments, and probably one of those uber cool telehandlers as well.
However, looking at the prices for skidsteer attachments, I'd only be able to afford one or two.
See here for some examples. Skid Steer Attachments - Everything Attachments
