Buying Advice CT235 bobtach pallet frame and forks

[Slowtorque]

Got a price of just over a grand on this set from local dealer. He also said he thinks the same setup that is used on the skidsteers is used on the CUTs. I assume this is the case. Weight is around 600 pounds for frame and forks. Anybody have a set of these? Seems like a lot of weight which is going to reduce the load I can carry with this setup. Just looking to use these to move logs around on the property, hopefully 3-400 pounds at a time. Thanks

 

[gumshu]

Got a price of just over a grand on this set from local dealer. He also said he thinks the same setup that is used on the skidsteers is used on the CUTs. I assume this is the case. Weight is around 600 pounds for frame and forks. Anybody have a set of these? Seems like a lot of weight which is going to reduce the load I can carry with this setup. Just looking to use these to move logs around on the property, hopefully 3-400 pounds at a time. Thanks

You should check the forks at Everything Attachments. Good quality, good price and not too heavy.

 

[milkman636]

I picked up a Bobcat 42" pallet fork assmbly last week for my ct335.

The frame is 200# and the tines weigh 164#. Total weight 364 lbs.

They are a little pricey, but they do fit-up nice and look right on the tractor.

 

[milkman636]

Google is your friend. Here is what I found in my search:

 

[duckhunter27]

I found a set of 48 inch bob tach forks on craigs list for $450. Work great .

 

[Slowtorque]

Milkman, you got a picture of the set-up mounted. Would love to see it if you do.

As for Everything Attachments, don't those forks mount on the bucket or do they mount to the bobtach after removing the bucket?

 

[IslandTractor]

It is ridiculous for a dealer to suggest a 600lb set of forks for a tractor with less than 1200lbs lift at pivot pins. Really, the dealer is either a complete idiot or trying to treat a customer as one. Given a lot of the weight of forks and load is forward of the pins your total lift capacity would likely be limited to a few hundred pounds.

He is trying to sell you forks designed for big skidsteers that lift more than two tons. The appropriate forks for your size CUT should be able to lift a ton at most and would probably weigh in the 250-300 lb range.

If your primary task is moving logs you really want a grapple not forks.

 

[roaf3x]

I would think Bradco or CA makes a nice light duty forks.

The 600 lb forks are for a Skid Steer not a small tractor.

I can not imagine why someone would try to sell you on that.

New or used forks are about 700.00 bucks.

Good Luck !

Roy

 

[tmarch]

Another place is Ebay, I bought a set off there and they work fine. Of course I'm a cheap bast### that doesn't care what it looks like as long as it works.

 

[grsthegreat]

I just bought a 42" skid steer style set of forks complete with the front guard from "Quick Attach". There 42" long forks and weight in at 400# but are rated to 4,500#.

My tractor has a lifting weight of 2,700# (breakout 3,500#) so i wanted the heavier capacity.

They were $795.00

 

[milkman636]

Milkman, you got a picture of the set-up mounted. Would love to see it....................

No pics yet. I should be able to post a pic here over the weekend for you though, when it stops raining.

 

[gumshu]

Milkman, you got a picture of the set-up mounted. Would love to see it if you do.

As for Everything Attachments, don't those forks mount on the bucket or do they mount to the bobtach after removing the bucket?

The mount on the Bobtach after removing the bucket.

 

[ss4010]

You should check the forks at Everything Attachments. Good quality, good price and not too heavy.

+1

COMPACT X-TREME DUTY Shaft Mounted Pallet Fork

Nice and light, strong. Inexpensive. Both QA and pin on styles available. Easy to move them around without a machine when they are not mounted. They have held up well to abuse. EA below has good pictures.

Construction Attachments 42" Compact Tractor loader Pallet Forks CAL-1PFCMPSM42

I ordered mine from Everything attachments and it was delivered to a freight terminal 3 days later (from North Carolina to California !!). Great guys to work with and a site sponsor.


Steve

 

[lilranch2001]

I paid 550 minus 100 (with my Bobcat discount coupon last year) for a Bobtach 42 inch pallet fork set

:thumbsup:

 

[milkman636]

Here is what my CT335 forks look like.

 

[lilranch2001]

Here is what my CT335 forks look like.

Mine are just like yours :thumbsup:

 

[k0ua]

I can reccomend the Construction Attachments QA Compact Forks from Everything Attachments. They weigh less than 300 lbs are fully adjustable to any width and work well. They are the right size for my tractor with about 1000 lbs of lift capacity, and they are rated for 1800 lbs. they are light weight, and weigh less than the bucket they replace. They have a nice mast, and work good for logs and brush as well as pallets. Watch their video and you will want some

James K0UA