CT 235 will not go into 4x4(front wheel assist)

   / CT 235 will not go into 4x4(front wheel assist) #1  

Arpad

New member
Joined
Dec 4, 2021
Messages
18
Tractor
Bobcat CT235
After some maintenance being performed (rear wheel/hub reseal and new couplers), I now can’t get the front wheels into the 4x4 mode. Looking at the MX service manual, the selector arm is fairly simple looking and doesn’t appear to complicated to access.
The 4x4 mode did work after the above MX for a job I did, but wouldn’t budge the next day. The tractor is functional in 2x4 mode.
The arm feels like it is jammed in a position that it’s not supposed to be. Looks like Hyd fluid needs to be drained (again!), Roll pins removed and access plate removed to see what’s going on.
Any experience out there on this issue?
 
   / CT 235 will not go into 4x4(front wheel assist)
  • Thread Starter
#2  
Disregard all. After some gentle persuasion with a 2# framing hammer, she be working per OEM.
 
   / CT 235 will not go into 4x4(front wheel assist) #3  
I have always heard just get a bigger hammer. :D
 
   / CT 235 will not go into 4x4(front wheel assist) #4  
Disregard all. After some gentle persuasion with a 2# framing hammer, she be working per OEM.
That works :)

I always have trouble getting my Kioti *out* of 4wd until the next day after it cools down, when it pops right out easy as pie.
 

Tractor & Equipment Auctions

2006 John Deere HPX Gator 4x4 Utility Cart (A53421)
2006 John Deere...
Misc Tablets And Laptop (A53425)
Misc Tablets And...
2015 Freightliner 122SD Day Cab Truck, VIN # 3AKJGND68FDGH1824 (A54865)
2015 Freightliner...
Ford Super Duty FX4 Pickup Truck Bed (A51691)
Ford Super Duty...
Toro MBTX-2500 Concrete Buggy (A54865)
Toro MBTX-2500...
2021 PJ 16 T/A DUMP TRAILER (A55745)
2021 PJ 16 T/A...
 
Top