CS2510 No power in reverse

[dougdou]

My CS 2510 with 42.0 hrs has recently lost power in reverse. Hi or Low range doesn't matter. The transmission is topped off. Works well in forward drives, the reverse pedal almost seems like their isn't enough throw to fully engage reverse. Is there an adjustment for the reverse pedal? Any ideas?

 

[LS Tractor Owner]

First, check all of the linkages under the floorboards going back to the tranny. There may be a loose pin or bolt, or maybe something got bent. Did it happen suddenly or has it been gradual?

Yes, they can be adjusted, but with the small number of hours, it shouldn’t have to be adjusted, unless something is loose. The instructions for the adjustment should be in the owner’s manual.

 

[dougdou]

It was more gradual, I noticed that I wasn't able to push the box blade, and then today I could hardly get it to get out of it's own way. It was getting dark when I was looking at the linkages. I will check it in the daylight to see if I can see anything. The owners manual is very limited when it comes to anything but normal servicing. May have to resort to taking it to the dealership since it is still under warranty.