Cruse control on HST

/ Cruse control on HST #1  

Hoffie

Member
Joined
May 22, 2007
Messages
32
Location
Southcentral Pa
Tractor
Kiota CK25
Does anyone use it? When & why? On by CK25 it does not work, that is it gradually slows down and stops.
 
/ Cruse control on HST #2  
I don't have the HST but I remember a post awhile back of someone having the same issue on a 25/30 and it came to getting under the "dash" and tightening the nut(s) on the control lever to put more "tension" on the lever so as not to allow it to back off on it's own when engaged (same as the throttle control on the gear drive). I had to back mine off on my gear drive, which was a pain in the butt to get to! Hope this helps ya.
 
/ Cruse control on HST #3  
I rarely use mine, but when I do it is great. My sister has a house 1 mile down the road (paved) and when she needs work done, like fixing a washed out driveway, I put it in 2wd and high, set the rpms at 2800 and set the cruise at full pedal. It really takes the strain off the ankle. I like it but could live without it.
 
/ Cruse control on HST #5  
I use mine all the time, mowing, going down the road,etc.
 
/ Cruse control on HST #6  
Hoffie said:
Does anyone use it? When & why? On by CK25 it does not work, that is it gradually slows down and stops.

ditto my ck25 does the same thing,i would like to use it when im mowing,so im going to try and find them nuts-n-bolts dirthualers talkin bout...chris
 
/ Cruse control on HST #7  
cruise control?? must be near the heated seat switch.
 
/ Cruse control on HST #8  
ROTFL :)

I guess you don't use no stinkin' cruise control?

Haven't used mine yet but am just waiting for a neighbor's call "Rex, can you drive over and (FillInTheBlank) for me?" Then I'll get some use from it.
 
/ Cruse control on HST #10  
If it is set at too low of pedal travel it won't hold.
It can also be adjusted.

BTI
 
/ Cruse control on HST #11  
BTI said:
If it is set at too low of pedal travel it won't hold.
It can also be adjusted.

BTI

way off the subject here bti but i was noticing that you were formerly known as kiohio,i had my wife set up this account when i was at work and as you can see my username is my whole email account, would like to change it to something alot shorter but dont know how.

i have sent numerous emails to the contact us link at the bottom of the page to no avail anybody with any info on this subject please reply, dont really know where to post it.......chris
 
/ Cruse control on HST #12  
Hoffie said:
Does anyone use it? When & why? On by CK25 it does not work, that is it gradually slows down and stops.

Same here - from day one it just slows down when engaged,(CK30HST). I adjusted it and that helped, but still not right. I don't really miss it.

When I mow, it's mid range and pedal mashed all the way. I just hold the pedal to the floor and am quite used to it now.
 

Marketplace Items

New Quick Attach Hay Spear (A61166)
New Quick Attach...
New/Unused Receiver Hitch (A61166)
New/Unused...
SD Lanch SDLGC80 (A62177)
SD Lanch SDLGC80...
2019 Vermeer MX300 Mixing System with Hose Reel (A60352)
2019 Vermeer MX300...
John Deere 5525 (A60462)
John Deere 5525...
Truck Mounted Carpet Cleaning Extraction Machine (A61166)
Truck Mounted...
 
Top