cracked fender on 2006 tc40

   / cracked fender on 2006 tc40 #1  

docjon

Member
Joined
Jun 11, 2007
Messages
37
Location
Coweta, ok
Tractor
kubota M7040 with FEL
anyone had a problem with the fenders cracking found new crack at the attachment where the plate and step conect. shouldn't this still be under warranty. there is no evidence of any dammage suspect weak area when climbing on tractor?
 
   / cracked fender on 2006 tc40 #2  
docjon said:
anyone had a problem with the fenders cracking found new crack at the attachment where the plate and step conect. shouldn't this still be under warranty. there is no evidence of any dammage suspect weak area when climbing on tractor?

I'm not sure I understand where your crack is. The steps (metal) on my tractor attach to the bottom of the platform (metal). There is no attachment to the fender. However, the metal platform bolts to the fiberglass fender and that area could be a likely location of a stress crack. I would say your tractor is definitely under warranty for that type failure. I'd talk to my dealer right away.

If you have your tractor financed, you probably also have insurance on it. There might be a deductible amount, but that would cover that kind of problem even if it was due to a bump or something falling on the fender. I'd sure check on all my options because that crack will probably just get worse.
 
   / cracked fender on 2006 tc40
  • Thread Starter
#3  
yes sir that is where it's at don't have my tractor talk back yet, I am purchasing this used but the warranty is transferable, so I plan on having this fixed first as I assume it will only get worse with time
 
   / cracked fender on 2006 tc40 #4  
If you haven't purchased it yet why not have the current owner at least report the problem to the selling dealer where you should have a better chance of a hassle free repair.

Andy
 

Tractor & Equipment Auctions

2016 JOHN DEERE R4038 LOT IDENTIFIER 181 (A53084)
2016 JOHN DEERE...
NEWTON CROUCH 1-04-7612 FERTLIZER SPREADER (A51247)
NEWTON CROUCH...
UNUSED CHERY INDUSTRIAL 9.5' WORKBENCH (A51248)
UNUSED CHERY...
LMC G500-500A LOT IDENTIFIER 217 (A53084)
LMC G500-500A LOT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
LOT IDENTIFIER 234 (A53084)
LOT IDENTIFIER 234...
 
Top