I have a jd3320 and am interested in growing & harvesting corn for my animals and was wondering if there was an implement that would work to harvest it. Someone near by had a one row corn picker for sale but said I needed 40 horsepower to opererate it. Any suggestions? Earl M.
corn growing & harvesting
- Thread starter norgeman
- Start date
- Views: 2360
KYErik
Platinum Member
- Joined
- Dec 2, 2005
- Messages
- 904
- Location
- South central IL
- Tractor
- 1977 AC 7000, 1980 JD 2840, 1963 Case 930, 1963 Ford 4000, 1943 Case SC, Case 530CK backhoe
If the corn picker is still for sale, it would be the best and cheapest way to harvest it. A one row picker shouldn't take but 20hp if you use your slowest forward gear- especially if its the old type that bolts on to the tractor.
You would then probably need to find an old grinder/mixer and grind the corn and cob along with some hay.
You would then probably need to find an old grinder/mixer and grind the corn and cob along with some hay.
Thanks for replying KYERIC, I don't know what you mean by bolts to the tractor but will find out. Also looking at the picture of it might not be feasible to bring it home from 50 miles away down the highway, but again I will find out.
KYErik
Platinum Member
- Joined
- Dec 2, 2005
- Messages
- 904
- Location
- South central IL
- Tractor
- 1977 AC 7000, 1980 JD 2840, 1963 Case 930, 1963 Ford 4000, 1943 Case SC, Case 530CK backhoe
The older "mounted" corn pickers bolted to the tractor frame and hung off to one side the tractor. You will have to do a little fabrication to get one of these to work.
http://lynnjacksonauction.com/images/on_line_equipment_sales/cornpicker.jpg
A pull type picker will likely work better for you.
http://www.w-t-p.com/2004/C09-4912.jpg
http://lynnjacksonauction.com/images/on_line_equipment_sales/cornpicker.jpg
A pull type picker will likely work better for you.
http://www.w-t-p.com/2004/C09-4912.jpg
Kessler Farms
Silver Member
- Joined
- Feb 22, 2008
- Messages
- 141
- Location
- Thurlow, KY
- Tractor
- (2) 2021 John Deere 6105E, 2015 John Deere 6115D with H260 loader, John Deere 5100E, 2007 JD 5403 2wd, 2008 JD 5403 MFWD with Koyker 185 loader, 2010 JD 5203 2wd, Farmall Super A, Cat 249D skid steer, 1964 JD 4020 diesel
Pulling the picker is only part of your problem. You have to pull the picker and the wagon behind the picker. I think you're gonna be way underpowered. A grinder/mixer takes quite a bit of Hp too. How many acres/animals are we talking about?