breadtrk
Platinum Member
Can we clean the dpf filter like we do on the big trucks?
Clean the DPF like big trucks do?
- Thread starter breadtrk
- Start date
- Views: 1795
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,562
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Technically, yes. It may be harder to get to than on the big trucks.
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,415
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
Pretty easy to get to on mine. You can use 1 part pool acid and 4 parts water and soak for 20 minutes then rinse well. Should remove all the ash..... Soot will turn to ash during regen. Not sure if I would do the DOC (burner) the way, but it should be OK
OP
breadtrk
Platinum Member
It's right on top, should be easier than plug#8 on a chevy with AC.
I'll use the same stuff I use on the Detroit. I clean it every 250,000miles and have had no emissions related issues in 1.4million miles.
I just didn't know if was the honeycomb design the truck has or something else.
I'll use the same stuff I use on the Detroit. I clean it every 250,000miles and have had no emissions related issues in 1.4million miles.
I just didn't know if was the honeycomb design the truck has or something else.
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,415
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
Same thing..... as far as I know in my 3135
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,415
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
ON mine the DPF is easy the DOC is in just before the DPF and it look like you have to pull the pipe from the turbo to get it out. DOC has a diesel burner to heat the whole thing. SO you have a fuel line and an igniter in that section.
I remember those days.