ck27
- Thread starter bullet20
- Start date
- Views: 1624
LD1
Epic Contributor
The plow requires traction (weight), the bushhog requires HP.
The CK27 is a rather heavy tractor for its power.
According to the PTO HP, a 4' cutter would be perfect, but wont cover your tracks. So I'd get a 5', you pay just have to slow down in places.
As to the plow, you have a pretty heafty tractor. It will probabally pull a large sincle bottom, like a 16", or two smaller bottom plows, like a 10 or 12.
I'll let other who actually have a ck27 chime in now.
The CK27 is a rather heavy tractor for its power.
According to the PTO HP, a 4' cutter would be perfect, but wont cover your tracks. So I'd get a 5', you pay just have to slow down in places.
As to the plow, you have a pretty heafty tractor. It will probabally pull a large sincle bottom, like a 16", or two smaller bottom plows, like a 10 or 12.
I'll let other who actually have a ck27 chime in now.
SSdoxie
Elite Member
I have the Bobcat version of the 27. I use a 4' cutter only becasue that is what I had with the older, smaller Kubota and often find myself going too fast with it. If I had more land to mow I would trade it for a 5' or 6'.
I don't plow but was looking for 1 before I came across a good buy on a tiller, was thinking of single 16" or 2 12". I think a 2 bottom 14" is a little big but depends on the soil type.
I don't plow but was looking for 1 before I came across a good buy on a tiller, was thinking of single 16" or 2 12". I think a 2 bottom 14" is a little big but depends on the soil type.
earljr59
Bronze Member
- Joined
- Mar 17, 2011
- Messages
- 90
- Location
- Fairfield illinois,usa
- Tractor
- 2007 kioti ck 25/130 loader and D-17 allis-Chalmers ,L3301 Kabota La 525 fel
I have a 5 ft. bushhog on my ck25 and it works real well.
miramadar
Gold Member
I use a 10" double-bottom plow with mine. Pulls it great.
This summer I used a 5' bush hog and it did very with it. It did bog down some in really thick, tall stuff. But, in the machine's defense, I had the bush hog set way low. Simply raising the 3ph a little when it bogs fixes it. I mowed a lot of saplings and tougher stuff with ease. Don't fear a 5-footer. 6' would be pushing it.
This summer I used a 5' bush hog and it did very with it. It did bog down some in really thick, tall stuff. But, in the machine's defense, I had the bush hog set way low. Simply raising the 3ph a little when it bogs fixes it. I mowed a lot of saplings and tougher stuff with ease. Don't fear a 5-footer. 6' would be pushing it.
Sraczi
Member
- Joined
- Mar 31, 2008
- Messages
- 31
Ck25hst with a 2-bottom plow works fine on LOW (fast enough to turn the heavy clay soil/grass). 5' finishing mower also works like a charm!
NVGoat
New member
My CK27HST pulls a single bottom plow without any effort in low. Ditto for a 5' box blade with all rippers set low. If bog down just raise the 3pt a bit and it will go on.
