CK2510 HST price check

[Buggs67]

I'm looking at a CK2510 HST. The dealer quote me USD $20,500 for a TLB combo plus tax. The CK20HST was $19,500. They have big rebates right now. Wondering if anyone knows if these are decent prices. Thanks in advance.

 

[CosperTractor]

2510HST with loader....MSRP $ 17,450 with R4 tires.
Add $6,675 for the backhoe and 12" bucket.
Buy local, watch out for those "internet" low dollar rip-off dealers!!!
Donald

 

[Buggs67]

2510HST with loader....MSRP $ 17,450 with R4 tires.
Add $6,675 for the backhoe and 12" bucket.
Buy local, watch out for those "internet" low dollar rip-off dealers!!!
Donald

So he's basically quoting MSRP less the current rebate. I wouldn't pay that for a car but I hear that tractor margins are lower.

 

[CosperTractor]

So he's basically quoting MSRP less the current rebate. I wouldn't pay that for a car but I hear that tractor margins are lower.

Yes, this is the MSRP price.
Contract with Kioti prevents me from pricing in other dealers area, I won't do it anyway.
Remember, you will always get what you pay for.
Buy local and save the headaches.
Donald

 

[Buggs67]

Thanks Donald. My local dealer seems honest and they've been there a long time. He encouraged me to get the CK20HST which would cost me $1,000 less. He said for FEL and BH use I wouldn't need the additional GPM and HP of the 2510. Would you agree? I'm planning to do landscaping, trenching/drainage work and retaining walls. Maybe some snowplowing when a storm overwhelms my snowblower and quad w/plow.

 

[KingsEquip]

Thanks Donald. My local dealer seems honest and they've been there a long time. He encouraged me to get the CK20HST which would cost me $1,000 less. He said for FEL and BH use I wouldn't need the additional GPM and HP of the 2510. Would you agree? I'm planning to do landscaping, trenching/drainage work and retaining walls. Maybe some snowplowing when a storm overwhelms my snowblower and quad w/plow.

I think I would have to disagree with your local dealer. I don't want to spoil him trying to move his CK20 but I personally feel the CK2510 is a more properly powered machine. The CK20 at times can be under powered. I have a few customers who have complained of the loader and b/h being slow. Not a lack of power but slower. The larger GPM pump would help with the speed. I think the higher hp and larger gpm pump is a great improvement in the CK2510. Just my personal opinion though. I have sold lots of CK20's and there really weren't too many complaints, just the above by select few.

 

[joe48]

2510HST with loader....MSRP $ 17,450 with R4 tires.
Add $6,675 for the backhoe and 12" bucket.
Buy local, watch out for those "internet" low dollar rip-off dealers!!!
Donald

Here's pricing I got this week on a new CK2510 with free loader;$15777, (loader value$3114); cab w/AC,Heat,$5499; mid pto $242; front snow blower $6558; rear remote $289. total = $28365.

May or may not trade in my CK20hst when I get it out of shop after $3000 to 3500 in trans repairs because of A lousey $10 part. (see post; CK20hst broke hydro trans tonight), dealer is offering 4000 for trade when running, I'm pretty sure I can do better selling out right.
Just so you know I love my CK20 and have worked it hard for 10yrs and 1500 hrs. Reason I'm sticking with it all my equipment is sized for it and especially my Rhino 65A backhoe.

 

[oldpilgrim]

4 weeks ago....ck2510 with loader, and BH.....$20,000 quoted.

 

[SacandagaBrad]

May or may not trade in my CK20hst when I get it out of shop after $3000 to 3500 in trans repairs because of A lousey $10 part. (see post; CK20hst broke hydro trans tonight), dealer is offering 4000 for trade when running, I'm pretty sure I can do better selling out right.
Just so you know I love my CK20 and have worked it hard for 10yrs and 1500 hrs. Reason I'm sticking with it all my equipment is sized for it and especially my Rhino 65A backhoe.

We're in the same boat! Other than my "simple" repair is a hydro seal on the internal pump of my TC-24D but same mega-hour labor bill. Looking at Boomer 24 and the Kioti 2510 since that is what the dealer handles. I don't want a new machine but will have to see where the chips fall. The free loader offer applies to the CK2510 too? I saw that offer on their web site but the 2510 wasn't listed despite the other CK models being there. Might just need updating since the 2510 is so new.

 

[joe48]

yes my dealer had a hard time finding it too. he's assuming its free like all other models. waiting to see about finance deals, right now nothing special will wait till end of quarter in Sept. dealer says that's when they announce stuff.
so may wait to pull trigger til then, we'll see.

 

[Tractornewb]

We're in the same boat! Other than my "simple" repair is a hydro seal on the internal pump of my TC-24D but same mega-hour labor bill. Looking at Boomer 24 and the Kioti 2510 since that is what the dealer handles. I don't want a new machine but will have to see where the chips fall. The free loader offer applies to the CK2510 too? I saw that offer on their web site but the 2510 wasn't listed despite the other CK models being there. Might just need updating since the 2510 is so new.

Wow, that sucks. 4k damage from a $10 part? Do they have a shuttle shift in the 2510 size range? Seems like that would be a no brainer.

I'm looking at Kioti's, compared to that "other orange" brand and the green one....prices seem pretty good for the Kioti's, at least new.

But, I'd like something that lasts a good long time, and not necessary going to cost $4k in 8-10 years of ownership.

 

[CosperTractor]

Gentlemen, do not get $$$'s in your eyes with the Free loader...just saying.
The actual price of the unit is what matters.
JMO,

 

[Tractornewb]

Gentlemen, do not get $$$'s in your eyes with the Free loader...just saying.
The actual price of the unit is what matters.
JMO,

I don't see the feel loader deal on the website anymore, but you are right. It did not seem like the "free loader" was all that. You might save a couple of hundred or so over some other brand. Not a killer deal but a relatively good one.

 

[CosperTractor]

Manufacturers come up with all kinds of sales programs to get you to buy.
Free loaders, 0% financing, blah, blah, blah and so on.
Look at the final sales price and do not get those $$$ stars in your eyes.
JMO,
DC

 

[joe48]

Wow, that sucks. 4k damage from a $10 part? Do they have a shuttle shift in the 2510 size range? Seems like that would be a no brainer.

I'm looking at Kioti's, compared to that "other orange" brand and the green one....prices seem pretty good for the Kioti's, at least new.

But, I'd like something that lasts a good long time, and not necessary going to cost $4k in 8-10 years of ownership.

Final bill $3950, that's after dealer took 10hrs of labor off bill ($800). They could only get $ help from Kioti on a new tractor, so they finally came back with a pretty good deal.
Now to be fair Mahindra and LS gave pricing almost as good as the 2510, but the big consideration was all my equipment is sized for the old CK20. Especially important was the ability to use my backhoe with out any modifications. If I went with a bigger 35hp class tractor I would end up spending a lot of money for modifications or replacing equipment.
I really didn't give much worry to the reliability of the Kioti's. As I've beat this unit pretty hard this is the only thing that has been a problem.
I have recommended Kioti to many people so still have faith in the equipment, BUT Kioti Corp. needs to work on parts and service support from the factory!!

 

[IslandTractor]

Somebody might be interested in this: New KIOTI 24hp 4wd Tractor w/loader & Backhoe It looks to be a new CK2510 TLB by the looks of it. $16.9K doesn't sound bad at all. Vermont I believe. Just bumped into the listing today.

 

[Buggs67]

Somebody might be interested in this: New KIOTI 24hp 4wd Tractor w/loader & Backhoe It looks to be a new CK2510 TLB by the looks of it. $16.9K doesn't sound bad at all. Vermont I believe. Just bumped into the listing today.

Looks like a CS2410. Still a good machine I bet.