CK20 MMM / Backhoe

[bigtractor]

Ok this has been an issue until now.
The new Woods 4 point mount is avail. and can be used with the MMM.
The 4 point is nice that it takes away all the loose subframe movement.
This is a awesome looking with the 6000 curved armed BH.

P.S. Woods is going to slowly go to all curved arm BH's

Pictures later.

Dave

 

[JayC]

Ok, I'm really eager to see the hoe on the CK20. How 'bout them pics? /forums/images/graemlins/cool.gif

 

[GerardC]

</font><font color="blue" class="small">( Pictures later.

Dave)</font>

Okay. It's been 2 days now. What's your definition of later /forums/images/graemlins/grin.gif /forums/images/graemlins/tongue.gif. Gerard

 

[KiotiJohn]

</font><font color="blue" class="small">( Okay. It's been 2 days now. What's your definition of later . Gerard )</font>
Probably when I get out there and take them for him! Maybe I can go Monday as Dave won't work tomorrow (SUN). John

 

[GerardC]

Cool. That sounds good John /forums/images/graemlins/wink.gif. Gerard

 

[JayC]

Were any photos able to be taken? /forums/images/graemlins/cool.gif /forums/images/graemlins/laugh.gif

 

[GerardC]

/forums/images/graemlins/confused.gif /forums/images/graemlins/smirk.gif

 

[jim_wilson]

Where is the info coming from that says the Woods 6000 (Groundbreaker X) backhoe will fit on the Kioti CK or other CUT sized tractors? I saw something about this posted in another forum on this site about a 4pt mount for a Kubota B -series tractor (CUT size) but the only info I can find in the Woods literature and the only tractors I have seen this hoe mounted on are SubCUT sized tractors like the Kubota BX, Massey GC , Deere 2210 and NH TZ series.

 

[KiotiJohn]

Here are the pics of the Woods BH6000 mounted on Kioti CK20. Also has the Woods loader.
The backhoe controls are very smooooth and substantial feeling in your hands. The stabilizers don't bang on the hoses when you raise them back up. The new curved dipper stick is the coming Woods design for all the BHs and appears to be very strong.
The subframe sits in two fork hooks at the bottom, and has two bolts at the top and the frame goes up to connec to the Woods loader frame. This subframe sits much higher than the Kioti model, and maintains a higher clearance. Also allows for use of a Mid Mount Mower (MMM) while the BH is on. Can't do that with the KB2375.
I liked this loader a lot. There are 10 pics altogether, and the final one is of the final checkup on the CK20 dressed in Woods. John

 

[KiotiJohn]

2

 

[KiotiJohn]

3

 

[KiotiJohn]

4 Notice how the bolt is at the top, a wrench mounted on the side for removal. Forked hooks on the bottom. BH drops into the forks, and the you bolt the top in.
John

 

[KiotiJohn]

5

 

[KiotiJohn]

6. Stamped steel swing instead of welds.

 

[KiotiJohn]

7

 

[KiotiJohn]

8

 

[KiotiJohn]

9. Sorry, I counted wrong, only 9.
This is a pic of me making the final examination of the CK20 dressed out in a Woods loader and new Woods BH6000 groundbreaker backhoe.
I must say the patient is in good health, strong as several oxen, and ready for many years of hard work! John

 

[JayC]

Can't say I like the looks of the Woods loader much. It seems like a downgrade from the Kioti KL120 loader. I do like the idea of a higher clearance on the BH subframe. Whenever I saw some pics, I always thought the Kioti BH subframes hung a little low. Thanks for posting the pics. /forums/images/graemlins/cool.gif

 

[KiotiJohn]

</font><font color="blue" class="small">(
Can't say I like the looks of the Woods loader much. )</font>
I thought it looked a little skimpy at first myself. It's because of the curved style. It's stronger than the box on the Kioti, so no need for it to be as wide. After being around it for a couple of hours, I began to see the real beauty of it though. Of course, one loses 1/2 a foot reach from the KL120, but the difference in the mount, and stamped instead of welded swing makes so much difference I wouldn't care.
john

 

[KiotiJohn]

One other thing. The bucket has removable teeth insteaded of welded in case one would like to do some smooth finishing. I like that much better than the welded ones my Kioti bucket has. That was a sore point at first, but I've grown used to them. John