CK-35 Won't start

   / CK-35 Won't start #11  
When building crash vehicles i often took an electrical connector apart to repair it. Even my own F-150 I did that to save the $58 Ford dealer wanted for the wire plug that connected my Carbon Cannister that was rodent damaged. I also saved connecters from throw away parts to pigtail onto damaged ones on wrecks. It was a time expedient, not just the money. I always solder when doable! esp. on machines like tractors or motorcycles/scooters that vibrate a lot.
Some pigatils are common, some are not common but they all tend to be generic.
 
   / CK-35 Won't start
  • Thread Starter
#12  
Just to update y'all, that connector worked perfectly, exact one I needed. took it out in the field, stripped a couple wires, twisted them together, put some electrical tape on it and the old Kioti started right up.

I did a better, more permenant repair with shrink tube, etc. when I got back to the barn.
 

Tractor & Equipment Auctions

2016 WINNEBAGO SCORPION 4014 5TH WHEEL CAMPER (A50854)
2016 WINNEBAGO...
2013 VOLVO VNL860 TANDEM AXLE SLEEPER (A51219)
2013 VOLVO VNL860...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2009 UTILITY TRAILER MFG. CO. SEMI TRAILER 57 (A50854)
2009 UTILITY...
2019 Fontaine Traverse HT T/A 48ft Loyboy Trailer (A49461)
2019 Fontaine...
2013 JLG 8042 TELEHANDLER (A50854)
2013 JLG 8042...
 
Top