OP
lakngulf
Veteran Member
Which section should it be in? I have looked but cannot find
CK 30 Gas Lever Not Working
- Thread starter lakngulf
- Start date
- Views: 5310
Which section should it be in? I have looked but cannot find
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,509
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
OP
lakngulf
Veteran Member
Thanks much!
Ranchofla
Silver Member
Yeah I saw that too, but only on Michigan Irons site, I found this part number on other sites T2350-60021,but it does not match MI site so I do not know...
OP
lakngulf
Veteran Member
I did order, the one that had the flag indicating it was the newest one for this model tractor. What's up with the shipping charges? More than the cable itself. I could have visited a Kioti dealer and ordered, but that would be two trips and a wait, so shipping charge worth the money if I can get the part here soon.
Thanks for the help!
jabelding
Gold Member
Yea the shipping prices are quite hi if your only buying a small part. With Michigan Iron for me the shipping is around $22 with a $5 part or a $500 part so I try to do multiple buys at once sometimes just get extra filters to make me feel better.
OP
lakngulf
Veteran Member
That's a good idea.
OP
lakngulf
Veteran Member
Ok. I did order the part, got it and installed yesterday. I may now know "what's up with the multiple parts". Not sure which one is the correct fit for my tractor but the one I ordered was not. It attached perfectly to the lever end, but the other end did not fit nicely into the grooved slot, so that the two nuts could be tightened on each side.
Instead, I had to use some wire to tightly attached the cable to the holder. It is working fine but, as they say, "held together with wire and baling twine", less the bailing twine.