CK 30 Gas Lever Not Working

[lakngulf]

Local dealer or Michigan Iron has a pretty good web site that you can order from.

Rancho

Which section should it be in? I have looked but cannot find

 

[murphy1244]

Which section should it be in? I have looked but cannot find

Try OEM Parts

 

[TJP89]

It's under Chassis, Accelerator Group, part 7. Throttle cable. Not sure what's up with the multiple parts and prices.

 

[lakngulf]

Try OEM Parts

Thanks much!

 

[Ranchofla]

It's under Chassis, Accelerator Group, part 7. Throttle cable. Not sure what's up with the multiple parts and prices.

Yeah I saw that too, but only on Michigan Irons site, I found this part number on other sites T2350-60021,but it does not match MI site so I do not know...

 

[lakngulf]

Yeah I saw that too, but only on Michigan Irons site, I found this part number on other sites T2350-60021,but it does not match MI site so I do not know...

I did order, the one that had the flag indicating it was the newest one for this model tractor. What's up with the shipping charges? More than the cable itself. I could have visited a Kioti dealer and ordered, but that would be two trips and a wait, so shipping charge worth the money if I can get the part here soon.

Thanks for the help!

 

[jabelding]

Yea the shipping prices are quite hi if your only buying a small part. With Michigan Iron for me the shipping is around $22 with a $5 part or a $500 part so I try to do multiple buys at once sometimes just get extra filters to make me feel better.

 

[lakngulf]

Yea the shipping prices are quite hi if your only buying a small part. With Michigan Iron for me the shipping is around $22 with a $5 part or a $500 part so I try to do multiple buys at once sometimes just get extra filters to make me feel better.

That's a good idea.

 

[lakngulf]

It's under Chassis, Accelerator Group, part 7. Throttle cable. Not sure what's up with the multiple parts and prices.

Ok. I did order the part, got it and installed yesterday. I may now know "what's up with the multiple parts". Not sure which one is the correct fit for my tractor but the one I ordered was not. It attached perfectly to the lever end, but the other end did not fit nicely into the grooved slot, so that the two nuts could be tightened on each side.

Instead, I had to use some wire to tightly attached the cable to the holder. It is working fine but, as they say, "held together with wire and baling twine", less the bailing twine.