Check transmission / hydraulic fluid level YM 3110D

   / Check transmission / hydraulic fluid level YM 3110D #1  

AndyTheCornbread

New member
Joined
Sep 15, 2021
Messages
16
Location
NW Montana
Tractor
Yanmar 3110D, IH Hydro 86
I guess I have three questions:

What gear and shuttle shift position should it be in when I check fluid?
Should it be running or not running when I check the fluid level?
If running, at what RPM?
 
   / Check transmission / hydraulic fluid level YM 3110D #4  
Fluid should be clear oil almost transparent. Definitely not milky or foamy.
Photo shows Tractor Supply's UTF swapped out after 10 years in the YM240 (simple gear transmission, not Powershift). Nothing has settled out in the couple of years that I've saved this sample, the text I set it on isn't obscured. Looks to me that this could have been left in service even longer. But only for a gear transmission. Powershift deserves more frequent fresh fluid.

20220521_153809-jpg.747085
 
   / Check transmission / hydraulic fluid level YM 3110D #5  
The Hyd. YM2000 pan looked like a Vanilla milk shake. The Bottom was as thick as Crisco in a can. had to scrape it out though the Filter tube.I'm in the high 900 tac. Hrs. so it's due to get changed again. This time I hope that's what it looks like! Pretty sure it will.
 

Tractor & Equipment Auctions

2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A51039)
2023 New Holland...
100 GAL L SHAPED FUEL TANK (A50854)
100 GAL L SHAPED...
2009 Freightliner Columbia 120  10-Speed, Mercedes MBE4000, 6x4 (A51039)
2009 Freightliner...
2016 John Deere 35G Mini Excavator (A49461)
2016 John Deere...
2022 Case IH Steiger 470HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
 
Top