Category 1 Narrow 3pt hitch

[Bently]

Does anybody have specs for the various Cat I 3pt hitches?

I have a friend who has tractor the and the lift arms on the 3pt will only spread to 24" max, so standard Cat I implements are too wide.

I've seen stuff listed for Cat I N (narrow), not sure what the specs are, though.

Thanks,
Ben

 

[Bently]

Does anybody have specs for the various Cat I 3pt hitches?

I have a friend who has tractor the and the lift arms on the 3pt will only spread to 24" max, so standard Cat I implements are too wide.

I've seen stuff listed for Cat I N (narrow), not sure what the specs are, though.

Thanks,
Ben

 

[greg_g]

I've heard the term "limited Cat 1" used with some of the sub-CUTs, but not "narrow". You might be describing a Cat "0". Perhaps THIS will help <i> narrow</i> it down.

//greg//

 

[greg_g]

I've heard the term "limited Cat 1" used with some of the sub-CUTs, but not "narrow". You might be describing a Cat "0". Perhaps THIS will help <i> narrow</i> it down.

//greg//

 

[bigtiller]

Sounds like a Cat. 0 hitch.

 

[bigtiller]

Sounds like a Cat. 0 hitch.

 

[Normmm]

it is best to weld and adapter to the equipment to use with the narrow arms. As long as the tractor is large enough to handel the equupment. Cat-0 stuff seems to break a lot.

 

[Normmm]

it is best to weld and adapter to the equipment to use with the narrow arms. As long as the tractor is large enough to handel the equupment. Cat-0 stuff seems to break a lot.

 

[oliver28472]

In some cases the pins can be pointed towards each other to eliminate that problem.

 

[oliver28472]

In some cases the pins can be pointed towards each other to eliminate that problem.