CAT II Ballast box (3) questions

   / CAT II Ballast box (3) questions #1  

Zebrafive

Super Member
Joined
Aug 5, 2010
Messages
5,635
Location
South West MI
Tractor
John Deere 2030, John Deere 6415
I am going to build a CAT II ballast box.

How High should I locate the center of the top link pin hole above the box so it will still work with a quick hitch? I plan to weld the bracket inside the box on what will be the side closest to the tractor.

What should the vertical centers be between the lower pins and top lin pin hole? Again so it will work with a quick hitch (a quick hitch is on my wish list I do not have yet)

Plan is to make it 32" wide and drill holes in the sides for the lower pins. Will this width work with a quick hitch?
 
   / CAT II Ballast box (3) questions
  • Thread Starter
#3  
Searching I found Cat II quick hitches are 32 3/4" between the lower hooks and 15" center to center upper to lower pins.
 

Tractor & Equipment Auctions

John Deere 6410 Loader Tractor (A50514)
John Deere 6410...
2018 John Deere 35G Mini Excavator (A49461)
2018 John Deere...
2014 VOLVO VHD (A50854)
2014 VOLVO VHD...
1997 John Deere 690 Elc Excavator (A50514)
1997 John Deere...
2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
2022 CATERPILLAR 259D3 SKID STEER (A51242)
2022 CATERPILLAR...
 
Top