Case 580 ck backhoe "conversion"
- Thread starter Spencerbackus
- Start date
- Views: 30127
-
- Tags
- case 580 ck
Rustyiron
Super Member
Yes on the great post!! Just what the op needed to know :thumbsup:
I'll shut up now.
I'll shut up now.
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,756
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
"That's not a conversion, that's just switching attachments"
True, but how many "attachment swaps" require a couple 1-1/2" wrenches, 4 feet of pipe, and 2 "bolt/clevise" pieces that require 450 foot pounds of torque?
True, but how many "attachment swaps" require a couple 1-1/2" wrenches, 4 feet of pipe, and 2 "bolt/clevise" pieces that require 450 foot pounds of torque?
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,756
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
"I'm betting these units are hard to find? "
Probably so Richard - I haven't used mine since I got a couple other used tractors - but lately I've been eyeing it with evil thoughts running thru the "mad scientist" section of my brain - after a few more projects get either done or scrapped, I'm gonna look at the possibility of converting it to a FRONT HITCH for one of my "loaderless" tractors, so I can put a quick hitch on the front for non-pto stuff - seems that, with age, my head is even LESS fond of trying to rotate as far as Linda Blair's (Exorcist, in case nobody remembers)
Anyway, extending frame rails shouldn't be a problem but beefing front axles may change my mind... Steve
(The UP side, if it works at all - definitely will NOT need other front weights for ANY implement that tractor can pull - did I mention these beasts are HEAVY??!? I doubt if ANY part of that "adapter" is thinner than 3/4" steel other than a couple of small "thinner" 1/2" parts - I'd guess the unit weighs around 5-600 pounds WITHOUT anything attached)
Probably so Richard - I haven't used mine since I got a couple other used tractors - but lately I've been eyeing it with evil thoughts running thru the "mad scientist" section of my brain - after a few more projects get either done or scrapped, I'm gonna look at the possibility of converting it to a FRONT HITCH for one of my "loaderless" tractors, so I can put a quick hitch on the front for non-pto stuff - seems that, with age, my head is even LESS fond of trying to rotate as far as Linda Blair's (Exorcist, in case nobody remembers)
Anyway, extending frame rails shouldn't be a problem but beefing front axles may change my mind... Steve
(The UP side, if it works at all - definitely will NOT need other front weights for ANY implement that tractor can pull - did I mention these beasts are HEAVY??!? I doubt if ANY part of that "adapter" is thinner than 3/4" steel other than a couple of small "thinner" 1/2" parts - I'd guess the unit weighs around 5-600 pounds WITHOUT anything attached)
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
I LOVE Linda Blair. A real head turner!
Terry
Terry
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 33,724
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
Steve, Europeans have had a "3pt" hitch on the front of their FWA tractors for a long time. I say go for it!!!! Would be awesome, especially if a Quick Hitch was adapted to it. Easy pick up of a weight rack, non-angle dozer blade, etc. :thumbsup:
