carryall / dumpbed for rear of bx1850

   / carryall / dumpbed for rear of bx1850 #1  

shrekbelly

Silver Member
Joined
Mar 20, 2007
Messages
219
folks,
am trying to think through the idea of adding a carryall to the 3pt hitch of my bx. i'd like to add a plarform or medium depth box of between 10 and 17 cu/ft. i don't want to trailer or tow a cart (storage space is non-existent presently).
has anyone succeeded at a project like this? or, better yet added a dump
feature to the bed?
a carryall would certainly increase it's functionality. i am eager to hear
( and see ) what people have done! thanks a million- shrekbelly
 
   / carryall / dumpbed for rear of bx1850 #2  
Here is a picture of a commercial one in use:
 

Attachments

  • SNOW.jpg
    SNOW.jpg
    115.9 KB · Views: 1,082
   / carryall / dumpbed for rear of bx1850 #3  
That looks like it's just right in size. I looked at the TSC's carry all today, and it looked huge. Where did you get it.?
 
   / carryall / dumpbed for rear of bx1850 #5  
I have the same one that Chuck shows in his picture (slightly different than the one shown in the link - there i is no tailgate). I purchased it at a local implement dealer and I don't know the make. Was about $320.

It has a pull lever that you can tie a rope to - pulling the rope will dump the box. It helps to have a hydraulic top link too - because sometimes the weight of the load is too far forward to dump. A quick tip of the toplink takes care of that.
 
   / carryall / dumpbed for rear of bx1850 #6  
Here is s pic of mine. you can take the sides off it has a back tailgaate that doubles as a seat for taking the kids for rides. built off a TSC platform.
 

Attachments

  • DSCN0139.JPG
    DSCN0139.JPG
    568.6 KB · Views: 1,519
  • DSCN0145.JPG
    DSCN0145.JPG
    564.6 KB · Views: 491
  • DSCN0154.JPG
    DSCN0154.JPG
    598.1 KB · Views: 517
  • DSCN0148.JPG
    DSCN0148.JPG
    503.9 KB · Views: 802
   / carryall / dumpbed for rear of bx1850 #7  
I just bought some 3-point pallet forks off of ebay for $60 and built a box out of treated 2x4's and deck boards. It works great for transporting dirt, rocks, wood or any other loose material. It does not dump, but I don't have much need for a dump bed.
 
   / carryall / dumpbed for rear of bx1850 #8  
Looks like ae_ted had the same idea. Mine is very similar, just not quite as wide.
 
   / carryall / dumpbed for rear of bx1850 #9  
llenrocs said:
I just bought some 3-point pallet forks off of ebay for $60 and built a box out of treated 2x4's and deck boards. It works great for transporting dirt, rocks, wood or any other loose material. It does not dump, but I don't have much need for a dump bed.
I have used a pallet to put the dirt on from digging with the BH.
You then can move the pallet and dump the dirt with the bucket forks.

50 chevy 60 chevy Bx23
 
   / carryall / dumpbed for rear of bx1850 #10  
ae_ted said:
Here is s pic of mine. you can take the sides off it has a back tailgaate that doubles as a seat for taking the kids for rides. built off a TSC platform.

ae_ted,

Can you tell me the dimensions of the box you made? Lookas like it is about 60" wide, 24" high, and around 30-36" deep?

I am stopping by TSC tomorrow for a "Carry-All"!
 

Tractor & Equipment Auctions

WOODS RT48.30 LOT NUMBER 235 (A53084)
WOODS RT48.30 LOT...
2012 INTERNATIONAL PROSTAR (INOPERABLE) (A52472)
2012 INTERNATIONAL...
2013 Dodge Charger Passenger Car, VIN # 2C3CDXATXDH646719 (A51572)
2013 Dodge Charger...
GENERAC ST20-S 2IN WATER PUMP (A52472)
GENERAC ST20-S 2IN...
2016 JOHN DEERE R4038 LOT NUMBER 195 (A53084)
2016 JOHN DEERE...
2017 KINZE KNOTCHED SINGLE DISK FERTILIZER OPENER FOR 3000/3500 SERIES PLANTERS (6 ROWS) (A53472)
2017 KINZE...
 
Top