Carry-All conversion to Bedder

[jake98]

Going to weld this up to pull the bedder/hiller attachment for raising garden beds. Normally the bedder attachment goes on a cultivator, but not having one, or my own garden yet, the carry-all (previously converted to a trailer mover) is once again to be the victim.
The disk is just sitting there to show it.

 

[Agrantina]

Make sure you post some pics after you finish.. I looked at a carry all the other day from KK.. It was $89.. I can hardly make one much cheaper than that? looks like a good base for many things..

Will you be able to take it on and off once you are done?

AndyG

 

[jake98]

Yeah, the bedder bolts on so I just needed to have something wide enough to line up with the ends of it. I'm not much of a welder but I'll get a little practice with it.

 

[Agrantina]

Melting metal is pretty fun and kindaa easy if you are not wanting a stack of dimes look.. Just slap some paint on it and another coat and one more

 

[bigdad]

Carryall frames are so versatile! I use mine for a sprayer tank platform among other things. I welded some heavy duty dollies on the trailing end almost like anti-scalping wheels so it doesn't rut/drag. Also it rolls on the garage floor when down.

Really anxious to see what you come up with Andy.

 

[Don87]

Make sure you post some pics after you finish.. I looked at a carry all the other day from KK.. It was $89.. I can hardly make one much cheaper than that? looks like a good base for many things..

Will you be able to take it on and off once you are done?

AndyG

Better get it while you can for that price:

CountyLine Carry All - 2128210 | Tractor Supply Company

 

[jake98]

This is how it ended up. I think it should work.

 

[captjack]

I built my bedder on a bar with a 2 inch piece of stock sticking out like a trailer hitch - it slides into a 2 inch receiver hitch i mount on the three point

 

[jeremycaudle]

This is how it ended up. I think it should work.

Where did you find the shank mounts for the hiller disc?

 

[gtrippleb]

Where did you find the shank mounts for the hiller disc?

Is this what you are looking for?
DISC HILLERS - Agri Supply