Can my tractor haul a large rotary cutter?

   / Can my tractor haul a large rotary cutter? #21  
Im enjoying the 租iscussion on TLB vs traditional tractors. Not sure why people think they are any different.

Not what I'll call a traditional tractor but when it comes to John Deere there is a differences between a JD 110 and a JD 110TLB.
The JD 110 is a lawn tractor and a JD 110 TLB is more of an industrial tractor.


John Deere 110
110.jpg



John Deere 110 TLB
John Deere 110 TLB.jpg
 
   / Can my tractor haul a large rotary cutter? #22  
Great pics of both machines!!!! When searching for a backhoe I looked at several JD110TLBs on CL. Man,,,, those things bring good money!!!!! Obviously highly respected and useful!!!!

There's a member on here that has a "collection" of older JD lawn/garden equipment It's a pleasure to see those old tractors!!!!
 
   / Can my tractor haul a large rotary cutter? #23  
JD has a bad habit of using the same number for many different tractors.
 
   / Can my tractor haul a large rotary cutter? #24  
Hey yall , looking for some wisdoms from the more experienced.

I own a kubota l39 TLB, 30.5 PTO HP. I am trying to find a bush hog that can cut thick brush. Probably 1.5? no bigger than 2?
I have found some medium duty bush hogs that meet all my needs but state a min PTO HP of 30.

Can I haul these? Can I turn them? I prefer to be conservative and definitely dont want to damage my tractor.
Any advise?

Thanks

The 田onventional wisdom is you need 5 hp per foot of width. I violate that rule every time I run my hog. My machine is like 18 hp at the pto.

I just can稚 cut thicker stuff as fast as others or really thick stuff at all.

That said I have used my light duty hog to munch up the occasional 1.5 to 2 inch sapling. I go dead slow. I wouldn稚 want to do a lot of that.

Mostly use mine for horse pasture. However waist high weeds I can take a full width pass and go as fast as I care to go.
 
   / Can my tractor haul a large rotary cutter?
  • Thread Starter
#26  
Ok Doc, haha, there is definitely more difference in your case.
 
   / Can my tractor haul a large rotary cutter? #27  
A Howse 500 is an economy cutter. A 285 Bush Hog is a medium duty cutter. Not the same class cutter.
 
   / Can my tractor haul a large rotary cutter?
  • Thread Starter
#29  
A Howse 500 is an economy cutter. A 285 Bush Hog is a medium duty cutter. Not the same class cutter.

Yes I am aware of this, thank you.
The Howse is rated for 1.5” and the BH is 2.5”
Both would work for what Im doing, but of course the BH is stronger.
 
   / Can my tractor haul a large rotary cutter?
  • Thread Starter
#30  
I've been looking at the 6ft brush cutter from Everything Attachments.
That might be the way to go.
Near the end of the video (14:50) he cuts down some very large trees!


Xtreme Duty 72 Inch Brush Cutter by Everything Attachments - YouTube

That cutter is definitely doing some work. Im looking more at 4’ and 5’ cutters since my work will be done mostly in the woods and I dont mind the smaller cutting area. My main focus is the cutting Capacity and the risk for overworking my tractor.
 
 

Tractor & Equipment Auctions

2016 John Deere 6155M (A50120)
2016 John Deere...
2013 Freightliner M2 106 Altec DC47T Insulated Derrick Digger Truck (A50323)
2013 Freightliner...
2016 Peterbilt 567 Tri-Axle Dump Truck (A50323)
2016 Peterbilt 567...
2007 Chevrolet C4500 4x4 Dump Truck, VIN # 1GBE4C3247F411826 (A51572)
2007 Chevrolet...
2015 Cadillac ATS Sedan (A51694)
2015 Cadillac ATS...
2019 Nissan Sentra Sedan (A50324)
2019 Nissan Sentra...
 
Top