Can anyone tell me what conversion fitting would fit my current valve from this site

[acadian32]

Good evening all, can anyone tell me what conversion fitting I need from this store world wide metric?





I have yet to find specification info for this FEL valve as to thread size and fitting type. thank you all.

 

[Bob Rooks]

That appears to be a 14mm ORFS on the power beyond port. What are you trying to do?

 

[acadian32]

Good day Bob, I have a leak at the elbow joint well a drip so because those are odd size was thinking of getting conversion fitting from the at store I mentioned above see picture

 

[acadian32]

and no I not planning on replacing the engine just jocking because as you know parts are not locally available in Canada pain in the """

 

[Xfaxman]

Good day Bob, I have a leak at the elbow joint well a drip so because those are odd size was thinking of getting conversion fitting from the at store I mentioned above see pictureView attachment 425223

Did you put a new O ring on when you put the hose back on?

 

[acadian32]

Hello Xfaxman, the only o-ring that I know of is the one you see on the picture is there another o-ring then the one you see on the picture thank you

 

[Xfaxman]

Hello Xfaxman, the only o-ring that I know of is the one you see on the picture is there another o-ring then the one you see on the picture thank you

No, that is the one, did you replace it?

And you never answered in the other thread, were is it leaking, there are three possibilities.

Tightly wrap a rag around the fitting and see were it gets wet first.

 

[acadian32]

good day I thought it was clear on my picture sorry about that its leaking at number 2

 

[acadian32]

Good day all. just a quick FYI I found the 2 conversion fitting for my spool valve and works great the in put and out put size is 15MDL-8MJ / Metric Conversion Male DIN 24* Cone Light Series to Male JIC 37* Flare Thread {1}: M22 x 1.5 Thread {2}: 3/4"-16 ( $32.00 each )

I ordered the 4 others for future use is I get a leak.