BX2380 - help identify where this part is from - fell off

[RobR5]

I have a BX2380 w/loader and drive over 60 MMM. I recently was doing some bucket work and heard a medal clanking noise then after backing up I seen this on the ground. It looks like some linkage however I have yet to figure out where it came from. The only I have noticed so far is the Mower seems to bounce more when driving around. I was hoping someone here might be able to help identify where it came from?



I appreciate any help on this one.


Rob

BX2380 - 77 hrs
Loader LA344
60 drive over MMM
Vacuum Bagger GCK60-26b

 

[nbryan]

Could it be a link from the loader levelling indicator? That's if you're loader came with one.

 

[RobR5]

Could it be a link from the loader levelling indicator? That's if you're loader came with one.

No it did not come with one.

 

[/pine]

Possibly linkage for the parking brake lever...

 

[nbryan]

Possibly linkage for the parking brake lever...

That seems about right, also check if both brake pedals and all shifting and control works - gear range, pto rear/mid select, pto engage, 3-point position control, 2wd/4wd, and cruise control?

 

[RobR5]

Thank you. I will run through all those to ensure they all work.

 

[/pine]

Also check the hand throttle lever...

 

[RobR5]

That seems about right, also check if both brake pedals and all shifting and control works - gear range, pto rear/mid select, pto engage, 3-point position control, 2wd/4wd, and cruise control?

I checked all these to ensure they all function and they all work with no issues. I suppose that’s good but confusing on what its from.

Rob

 

[nbryan]

I'm guessing it came off your mower then.

 

[diesel85]

That sir, is your diff lock rod.

I just dismantled and put a new transmission in a BX2380 last week. So I am very familiar with that machine.