BX2350 FEL Forks - completed

[SkunkWerX]

I just finished and used my forks on my BX2350 FEL.
Soicne the BX2350 is on the small side of things, I wanted to keep the forks shorter, yet allowing for picking up things up to about the 500 lb. range.

I used 2x2 square tube, 3/16" thick. They were 4 foot sections, but I ended up cutting off a few inches. from cutting edge to Point is about 30 inches.

Used them yesterday to haul brush and logs in an area I am cleaning up before installing a fence line.

(Also pictured, is the 20 yr. old grader blade I rehabbed, cut from 6 foot wide down to 5 foot, and painted matching color)

http://usera.imagecave.com/skunkwerx/Forks.jpg

http://usera.imagecave.com/skunkwerx/ForksBlade.jpg

 

[crbr]

I just finished and used my forks on my BX2350 FEL.
Soicne the BX2350 is on the small side of things, I wanted to keep the forks shorter, yet allowing for picking up things up to about the 500 lb. range.

I used 2x2 square tube, 3/16" thick. They were 4 foot sections, but I ended up cutting off a few inches. from cutting edge to Point is about 30 inches.

Used them yesterday to haul brush and logs in an area I am cleaning up before installing a fence line.

(Also pictured, is the 20 yr. old grader blade I rehabbed, cut from 6 foot wide down to 5 foot, and painted matching color)

http://usera.imagecave.com/skunkwerx/Forks.jpg

http://usera.imagecave.com/skunkwerx/ForksBlade.jpg

Nice looking machine with plenty of functionality.

 

[SkunkWerX]

Thanks!

Forks for an FEL are an inexpensive add-on, but really high value for the dollar.

I can haul much more (logs and brush) and longer pieces, a real time saver.

Forks at Work

 

[kwolfe]

Great looking work.