bx2230 snowblower valve

[edster]

I own a 2005 bx2230 kubota, just ordered a 2750d snowblower from local dealer. My ? is what is the best way to hook up the hydraulics since i have a 3 position valve that stays with the loader when removed? My dealer seemed confused on the best way. Suggested making a new bracket to hold valve to remain on tractor at all times or buy a rear remote kit for $300.I am new to this forum , thanks for any help. edster

 

[art]

I'd still just use the loader valve! the loader piece is not that bad to reconfigure to use it!!!

 

[kennyd]

I'd still just use the loader valve! the loader piece is not that bad to reconfigure to use it!!!

Art, is it possible he has the 3-way valve on that machine? You know the one that will not allow the chute rotation to work?

 

[edster]

thanks Art, do you have any part numbers or pics of bracket for ideas?

 

[art]

We have just changed the bracket so the right hand vertical stayed with the tractor making the upper pin the one that you pull.

The chute rotation should be addressed, we sent all ours out with the four way valves just because. To use the electric rotator would have eliminated that problem.

 

[edster]

Hey Art, have you ever used the rear remote kit for the lift of the blower or is to much of a hassle?