BX2230 - Rear Remotes

Eightpoint · Feb 4, 2009

jnjpream -

Definitely worth looking around and $600 for a full tnt setup may be possible if you do everything yourself but the one in question is already assembled and ready to go (for the BX24 and 25). Once you introduce a welder to make a nice bracket and factor in the time to figure everything out then maybe $650 isn't so bad after all. There was a thread where Messicks was selling a setup for $650 and this was in 2007. See post 34 in this thread:

http://www.tractorbynet.com/forums/...ng/94291-bx24-rear-remotes-hydraulic-top.html

bruceatlam · Feb 4, 2009

That auction says that the hydraulic top link is included in the auction. If you can ignore the bracket, I think that the rest of what you're buying in that auction would cost about $500 brand new. That's $300 for the spool valve, fittings, QD's and hoses from Surplus Center including the freight to ship it and $200 for the hydraulic top link. That system is used -- looks like it works fine but still used. Maybe worth $400??

FishAlaska · Feb 4, 2009

Just so everyone knows....the factory remote kit for the BX2350 WILL NOT work on a BX24 or 25. My dealer says there is no kit for the 24 or 25 and the book specifically states it will not work on the 24 or 25.

BTW that is from Messicks, that it does not work and one is not available for the 24 or 25.

/pine · Apr 4, 2023

BX2230 - Rear Remotes

I posted this over in the hydraulics forum but didn't get any responses so I thought that I might have better luck in the Kubota forum. I am contemplating adding rear remotes to my BX2230 to "trick it out" a little bit. I would like a TNT arrangement to make my life easier with hooking up and...

www.tractorbynet.com