I keep losing the wing nuts/knobs and the washer that hold the MMM belt cover on. Any tips on how to keep these from coming off? I assume they are rattling loose. I think I've lost 3 or 4 in the past year or 2. You would think I would start finding them in the yard. I may just try to find a regular nut to replace them with this time. Anyone else have this problem?
bx MMM wing nut/knob
- Thread starter Tractorrr
- Start date
- Views: 950
dodge man
Super Star Member
I’ve lost at least one of mine. I replaced it with a nut a washer.
robertm
Veteran Member
Get some LockTite. Not sure which color is for light duty, but that will do the trick.
David_Kb7uns
Veteran Member
Get the Hillman Universal Knob and put a nylock nut in it.
Amazon.com: The Hillman Group 55429 Universal Star Knob-Fits 3/8, 2-Pack: Home Improvement
David
Amazon.com: The Hillman Group 55429 Universal Star Knob-Fits 3/8, 2-Pack: Home Improvement
David
Byrdnyrd
Silver Member
- Joined
- Oct 28, 2012
- Messages
- 136
- Tractor
- BX2370 60" MMM with bagger, BX5450 Front mount Blower, soft cab, 48" Brush hog, Several Gravely's, Lots of Land Rovers, Best wife EVER!!
If you boooger up the threads on the NUT ( they are Brass) a little, the nut wont vibrate loose.
Use a pin and hammer to flatten out a couple of threads, that should be enough.
Cheers,
Use a pin and hammer to flatten out a couple of threads, that should be enough.
Cheers,
bunyip
Elite Member
Was over thirty years ago we used a rubber like paste on the thread, it didn't set but it stopped nuts rattling off, it may well be a Loctite product.
You could always drill a hole in the 'wing' on the nut and attach a wire to tether it so it doesn't get lost, I have done this on some of my yacht fittings swaging on a 1mm wire.
You could always drill a hole in the 'wing' on the nut and attach a wire to tether it so it doesn't get lost, I have done this on some of my yacht fittings swaging on a 1mm wire.
