BX 25 tool box

[gmbracing]

I took the idea for a tool box from the bx25d, got a inexpensive 12" tool box and fabricated up a clamp on mount and there we are.
not in the way as far as I can see and holds a lot of the small tools and parts.

 

[pwt]

Your setup looks nice.
I bolted a couple of steel tool boxes on teh FEL supports. Works great, very solid.

 

[dsmiley]

I took the idea for a tool box from the bx25d, got a inexpensive 12" tool box and fabricated up a clamp on mount and there we are.
not in the way as far as I can see and holds a lot of the small tools and parts.

Great idea. If I might ask, where did you get the square u-bolts? Thanks.

 

[radioman]

I have seen square u bolts at TSC and lowes.

 

[dsmiley]

I have seen square u bolts at TSC and lowes.

Yeah, a number of places carry square u-bolts but not nice fitting ones for the ROPS. I have found good ones to go the other way like this -

but not nice fitting ones like those the OP used. They would be something like 3/8 x 1 1/2 x 5 or maybe 3/8 x 1 3/4 x 5. Just trying to find his source.

Dean

 

[jb62901]

My tool box.


http://oi54.tinypic.com/szzajq.jpg

 

[gmbracing]

the ubolts came from a canopy manufacter, that were given to me.

 

[gmbracing]

look at a triler supply company they use some like that to hold the axel to the springs

 

[L355SS]

I use threaded rod (3/8 or 1/2 inch) to make any size needed. Use a torch to heat then bend over a simillar size tubing or in a vise.
Dennis