BX 2200 top link replacement
- Thread starter Hootie
- Start date
- Views: 2212
NY_Yankees_Fan
Veteran Member
- Joined
- Mar 4, 2002
- Messages
- 2,209
- Tractor
- Kubota BX 2200
The Tisco #JSA1009 is a perfect fit and is only $13.
See this threadhttp://www.tractorbynet.com/forums/k...-top-link.html
See this threadhttp://www.tractorbynet.com/forums/k...-top-link.html
kwolfe
Platinum Member
I'll second the Tisco. Have one, great fit!
HomeBrew2
Banned
I just bought the generic replacement as otheres have but got mine at a NH dealer. A 9" barrel length is good for most stuff but I got a 12" also. Very cheap, work great.
JerryG
Super Member
TSC has two different lengths that they can get. The longer one is just short of 13" center to center. The shorter one is about 11". I measured the longer one but just looked at the short one , but it appears to be about 2" shorter.
JBX
Bronze Member
Hi Hootie,
Check out the one at TSC again. The TSC toplink I bought for my BX2200 is a few inches longer than the stock one, but it actually helps my middlebuster, shredder and plow work better!
It allowed a greater adjustment for front and back leveling of the implement.
It works for me. It was less than $20 if I remember.
jbx
Check out the one at TSC again. The TSC toplink I bought for my BX2200 is a few inches longer than the stock one, but it actually helps my middlebuster, shredder and plow work better!
It allowed a greater adjustment for front and back leveling of the implement.
It works for me. It was less than $20 if I remember.
jbx
