3-Point Hitch Busted Casting

   / Busted Casting #11  
Wow, how the heck did that happen?
 
   / Busted Casting
  • Thread Starter
#12  
A young man with a Thermal Arc 3 in 1 machine came over and did a real nice job of repairing my broken casting.

Casting Repair #1.jpgCasting Repair #2.jpgCasting Repair #3.jpg

Thanks for all of your comments.

Mike
 
   / Busted Casting #13  
   / Busted Casting #14  
I too hope it holds, maybe keep us informed. :thumbsup:
 
   / Busted Casting #15  
I hope the weld holds. Welding cast steel isn't that hard just using 7018 rods as long as you get full penetration. From your photos, it really doesn't look like he used full penetration welds so durability is a little doubtful.
 
   / Busted Casting #16  
What type of welding rods was used on the repair?
 
   / Busted Casting
  • Thread Starter
#17  
I can't tell you all what kind of rod he used. I think it was cast steel though. I used a middle buster through a mess o' roots and it is still holding. I'll keep my fingers and toes crossed.

Mike
 
   / Busted Casting #18  
" I'll keep my fingers and toes crossed."<<<<<<Sometimes that works when a repair is not quite 100% weld, lot of repairs tend to fail after awhile, main cause is LOF.
 
   / Busted Casting #19  
I had the same break a couple years ago root cause was a stress fracture from the boring of the cast in manufacturing. I found an old school welder that welded it up with nickel. It wasn't cheap but is now stronger than the cast iron around it.
 

Tractor & Equipment Auctions

2013 Ford F150 4X4 Pickup Truck (A53422)
2013 Ford F150 4X4...
2015 AMERITRAIL MANIFOLD TRAILER (A55745)
2015 AMERITRAIL...
2011 Chevrolet Traverse 1LT SUV (A55758)
2011 Chevrolet...
Miller Big 40 Portable DC Arc Welder Generator (A55973)
Miller Big 40...
2012 Big Tex 14ET-20BK 20ft T/A Flatbed Trailer (A55852)
2012 Big Tex...
(INOP) LINDE H35D WAREHOUSE FORKLIFT (A52706)
(INOP) LINDE H35D...
 
Top