Building a JD 67 Loader stands

[willowbilly]

Newbe alert!!! Forum rules state that I must post to complete registration process. so here goes,
Hello!
Trying to build a 67 loader stand for my loader and JD 750 tractor. Search of build it yourself forum is a bit confusing but someone must have built a set of these stands. Dimensions would be great as I think I understand the concept. Before I reinvent the wheel I thought I'd ask here. Thanks
Mike

 

[PHPaul]

I had a 750/67 for years.

The loader has square holes in the "diamond" where the main boom bends down towards the bucket.

There were adjustable legs that came with the loader that plugged into those holes and were secured by lynch pins.

Once the legs were in place you could unpin the bottom of the towers, tip the loader up a bit, unhook the hoses and back out of the loader.

As long as the loader was on a solid surface, it'd sit there on the bucket and those two legs just fine.

 

[willowbilly]

Thank you for the reply. Your picture helped me a lot as the drawings weren't really that clear. Thanks again, I have the first half built. Mike