bucket not working right

[henrysMFGC2310TBL]

I went out this morning to move some dirt and the bucket would not tilt all the way back but it would dump, so I did 2 small loads. I removed the two pins that hold the cylinders to the top of the bucket and the bucket swung freely. I tried the tilt and the cyl'ds would not move???? As I was looking at the quick cpl at the FEL control I noticed one was not as far down as the others so I removed it and re installed it and now the FEL is working great again. It did not leak under pressure.

 

[Scotty370]

I went out this morning to move some dirt and the bucket would not tilt all the way back but it would dump, so I did 2 small loads. I removed the two pins that hold the cylinders to the top of the bucket and the bucket swung freely. I tried the tilt and the cyl'ds would not move???? As I was looking at the quick cpl at the FEL control I noticed one was not as far down as the others so I removed it and re installed it and now the FEL is working great again. It did not leak under pressure.

Your certainly not the first of folks that have suffer the Quick Disconnect Mal-Seated dilemma! J_J, and KennyD have saved countless souls......!! Good catch!! ~Scotty