Bucket Cutting edge added

   / Bucket Cutting edge added #1  

Mrsig

Gold Member
Joined
Jun 9, 2021
Messages
370
Location
Bushnell, Fl
Tractor
LS MT225 4x4
I waited months and it finally came in from LS! It came with the bolts, lock washers & nuts. It is one solid piece of steel. I added lock tight to the bolts just to make sure they stay put.
bucket1.jpeg


bucket2.jpeg
 
   / Bucket Cutting edge added #2  
Very nice! Would you mind telling us what you piad for it?
 
   / Bucket Cutting edge added #3  
Part number ?? Is that a 54" bucket?
 
   / Bucket Cutting edge added
  • Thread Starter
#4  
FEL Blade Kit PN 40432042 price $195 plus tax from my local dealer in Bushnell, Fl.
 
   / Bucket Cutting edge added #5  
Last edited:
   / Bucket Cutting edge added #6  
This is the same one I had the dealer install when purchased new....I wanted the blade for bucket stability and not to wear down the bucket edge. 54" bucket on the MT225S. Blade is two sided.
 
   / Bucket Cutting edge added
  • Thread Starter
#7  
This is the same one I had the dealer install when purchased new....I wanted the blade for bucket stability and not to wear down the bucket edge. 54" bucket on the MT225S. Blade is two sided.
How is yours holding up?
 
   / Bucket Cutting edge added #8  
So you were worried about possibly wearing out the stock cutting edge ? Sometimes consider getting one of these for mine but so far haven’t
https://www.everythingattachments.com/EA-Wicked-Tooth-Bar-for-Tractor-Buckets-p/eta-wtb.htm

my tractor has 72” bucket so the tooth bar would cost $531.74 !!!
Ordered one for my MT240 on 2/4 and received it 2/11! Still need to install it. but I don't know if they just happened to have one or what because they said about 4 weeks when I ordered it.
 
   / Bucket Cutting edge added #9  
How is yours holding up?
Almost a year on mine....a little bur on the blade but ground that off. Still Doing the Job...Still sharp. Not allot of dirt work....some DG on the driveways...not mine, TONS of snow removal and still removing snow and thick ICE from street and our concrete driveways. Did 70 plus buckets of snow just yesterday. Love the tractor and blade.
 
   / Bucket Cutting edge added #10  
How many bowed down buckets have you seen? Neighbor has a 10 year old TLB and boy is his bucket bent, told me he wishes hr had added one. I paid $150 for the cutting edge for my BX-2370 3 or 4 years ago, silly dealer tried to convince me I could just buy a new bucket for >$200 and then replace that one when it got too bent. My bucket is still straight.
Tried to dig, but found out that's a loosing proposition. so I added a wicked tooth bar. NOW I can dig.
 

Tractor & Equipment Auctions

CATERPILLAR 20" PIN ON BUCKET (A52707)
CATERPILLAR 20"...
HURRICANE STAND ON SKID STEER (A52706)
HURRICANE STAND ON...
New/Unused 250 Traffic Cones (A54865)
New/Unused 250...
2018 Chevrolet Camaro 1LT Coupe (A55853)
2018 Chevrolet...
2012 Chevrolet Silverado 2500HD Enclosed Service Truck (A53422)
2012 Chevrolet...
2018 Chevrolet Tahoe SUV (A55853)
2018 Chevrolet...
 
Top