Brinley plow pulling

   / Brinley plow pulling #1  

Boog

Member
Joined
Jun 22, 2005
Messages
41
Location
Spencer OH
Tractor
X500, GT 235, 3020 powershift
Hi guys,
Does anyone use a garden tractor to pull a small moldboard plow like the 10inch Brinley? I have been thinking of trying this for a long time but haven't been able to convince myself that my GT235 Deere is heavy enough to do it at least at any reasonable depth. Any experience out there? Oh, and I have hard clay soil too. Thanks for any stories.
 
   / Brinley plow pulling #2  
I have a Craftsman 25 hp garden tractor and their equivelent plow. The tractor does a pretty good job but needs chains and wheel weights and if the ground is really hard, needs multiple passes.

I made a box receiver hitch for my 3pt on my JD 790 and an adapter for the plow. The John Deere does even better.
 
   / Brinley plow pulling #3  
I have been thinking about that too, but for what you invest in a hitch, plow and harrow, you could get a decent rototiller...
 
   / Brinley plow pulling #4  
Added a few pics of an 8 inch I pull to a depth of 6 inches in clay (orange stuff). Pulls good, 12HP 300kg Wheelhorse. Made all the linkages myself.
Pics show.
Hope this helps, you should be fine pulling it is you have ag tyres and wheel weights.
 
Last edited:

Tractor & Equipment Auctions

2014 Freightliner M2 106 Altec DC47T Insulated Digger Derrick Truck (A50323)
2014 Freightliner...
2020 Utility Trailer Manufacturing, 53' Trailer (A52384)
2020 Utility...
1273 (A50490)
1273 (A50490)
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2018 Caterpillar CS54B Smooth Drum Vibratory Dirt Compactor (A51691)
2018 Caterpillar...
3pt Plow (A50120)
3pt Plow (A50120)
 
Top