Brake adjustment ?
- Thread starter RickSr
- Start date
- Views: 10104
ptsg
Super Member
There is a rod going from the pedal to the back of the tractor. On this rod, you'll find a coupling nut (the longer one) and a jam nut. Loosen the jam nut and then adjust the coupling nut to increase or decrease the length of the rod and therefore adjust the brakes. Get the jam nut tight once you're done with it in the end. You'll want some free play on the brake pedal, like an inch or so.
If you have troubles finding the linkage, get someone on the tractor just pressing and releasing the brake pedal while you check for the linkage underneath.
If you have troubles finding the linkage, get someone on the tractor just pressing and releasing the brake pedal while you check for the linkage underneath.
rdinatal
Gold Member
- Joined
- Nov 30, 2016
- Messages
- 323
- Location
- Lake Normanopolis, NC
- Tractor
- Old: 2016 eMax25s HST, New: 2017 Max 26xl HST
Why do you think adjustment is needed?
I ask as I had an eMax and always thought the brakes were weak. They worked but if I forgot to release the lock the HST would easily overpower them.
I now have a Max26. When those brakes are locked the HST will not move it. BIG difference between the two.
I ask as I had an eMax and always thought the brakes were weak. They worked but if I forgot to release the lock the HST would easily overpower them.
I now have a Max26. When those brakes are locked the HST will not move it. BIG difference between the two.
Thanks for your reply.
I think they need adjustment because the peddle seems to be going down much more than when I first got it. The brake works, I think there's just to much play in it.
