Bolt on back hoe teeth

   / Bolt on back hoe teeth #1  

LindenBruce

Gold Member
Joined
Apr 8, 2013
Messages
457
Location
Linden, Ca.
Tractor
Husky GT2654, Branson 4520TLB
Does anyone know where I can get sharper teeth for my backhoe? They are bolt on style. I have been trying to find something like the Tiger Teeth, but I am drawing a blank on the style that will fit my bucket. It's a standard Branson bucket. Nothing fancy. My soil is either sandstone or hardpan. And it took 4 hours to dig 10 30" deep holes for future trees. There has to be an alternative. Any ideas? Thanks, B.
 

Attachments

  • tooth1.jpg
    tooth1.jpg
    9.8 MB · Views: 159
  • tooth 2.jpg
    tooth 2.jpg
    10.4 MB · Views: 152
   / Bolt on back hoe teeth #2  
Does anyone know where I can get sharper teeth for my backhoe? They are bolt on style. I have been trying to find something like the Tiger Teeth, but I am drawing a blank on the style that will fit my bucket. It's a standard Branson bucket. Nothing fancy. My soil is either sandstone or hardpan. And it took 4 hours to dig 10 30" deep holes for future trees. There has to be an alternative. Any ideas? Thanks, B.
Hey Bruce. Have you considered taking the teeth to the dentist... I mean machine shop?
 
   / Bolt on back hoe teeth #3  
Consider soaking the ground for a bit first (won't help with stone but here in the summer our clay gets *hard*)?

OT: have you found a source for tooth replacement? I ordered replacements for mine from my dealer but I've found *nothing* elsewhere and I can find a needle in the haystack of the interwebs.

Alternative for both of us: Weld-on tooth sockets that have pin-on teeth of a variety of styles.
 
   / Bolt on back hoe teeth
  • Thread Starter
#4  
There is one in every crowd 🤣 (LOL). Yes, I have thought about taking a grinder to the teeth to sharpen then. And that is prolly what I may have to do. It's funny you should mention a dentist, becuase I go there tomorrow. SMH.

Where do I get weld on tooth sockets? B.
 
   / Bolt on back hoe teeth #5  
I don’t think you’re going to help it much but just take a grinder to them. Maybe take a cutoff wheel to the sides and make them more of a point.
 
   / Bolt on back hoe teeth
  • Thread Starter
#6  
That's sounds good thanks. B.
 

Tractor & Equipment Auctions

New Kivel Walk Behind Pallet Forks (A50774)
New Kivel Walk...
Kubota R520S (A50120)
Kubota R520S (A50120)
2022 Bobcat T770 Skidloader (RIDE AND DRIVE) (A50774)
2022 Bobcat T770...
Club Car Carryall 500 (A50121)
Club Car Carryall...
2006 John Deere 650J LGP Crawler Tractor Dozer (A50322)
2006 John Deere...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top