Bolens 1900 Hydro Eliminator

   / Bolens 1900 Hydro Eliminator #1  

DudeJohnDeere

New member
Joined
Dec 5, 2016
Messages
16
Location
Walworth, NY
Tractor
1940 Allis Chalmers B, 1992 John Deere 445, 1998 John Deere 855, 2001 John Deere SST18, 2007 John Deere Gator TX and many others at the farm yard
I have replaced the solenoid because it was bad. When I turn the key, nothing happens except for the headlights turning on but when i short out the solenoid the engine turns over. I am just wondering if I have it wired correctly or not.
 
   / Bolens 1900 Hydro Eliminator #2  
Could be the key switch contacts.

Do you have a volt meter to see if you are getting juice into and out from the key switch and on to the solenoid?

You are sure there is no "click" from the solenoid when the key is turned to start?

Many solenoids take juice from the battery wire via a small jumper wire to the solenoid body. then the key switch provides a path to ground, energizing the solenoid.

I bet an internet search for your tractor's wiring diagram would turn up all the details.
 

Tractor & Equipment Auctions

2012 Volkswagen Jetta Sedan (A53424)
2012 Volkswagen...
2013 John Deere 824K Wheel Loader (A53473)
2013 John Deere...
40' SHIPPING CONTAINER (A53843)
40' SHIPPING...
2019 CATERPILLAR D6T LGP HI TRACK CRAWLER DOZER (A51246)
2019 CATERPILLAR...
2025 K5436 UNUSED (5) Wire Mesh Panels (A53117)
2025 K5436 UNUSED...
1990 PETERBILT 320 HYDROVAC (A53843)
1990 PETERBILT 320...
 
Top