Bobcat CT5550 suddenly stopped

[Michael Michaelis]

Hello I have a Bob cat CT5550 I was using the box blade for about 2 hours with rpm set at 2300, when tractor suddenly stopped, no warning lights sounds prior to shut off. I cant start it now, there is both diesel as well as oil,. The batterie is also sufficient, the tractor turns over however it will not start.

Anyone have some suggestions?

 

[tman1020]

Sounds like some type of safety sensor. Possibly with the seat?

 

[Roadworthy]

If the tractor turns over your safeties are probably all satisfied. Since it died while in use the fuel stop solenoid may be suspect.

 

[Michael Michaelis]

Sounds like some type of safety sensor. Possibly with the seat?

Seat sensor did not appear to be damaged and connection was secure, thanks for the thought though.

 

[Michael Michaelis]

If the tractor turns over your safeties are probably all satisfied. Since it died while in use the fuel stop solenoid may be suspect.

Ok that makes sense.... I bought the tractor new last year and so i still have warranty on the machine... I will call the company today hopefully it is a quick fix for them to get me back up and running. I will post the results as they come in. thanks for your input

 

[Michael Michaelis]

Short thread might help: 773G Shutting Down Before Startup

*just realized CT is a tractor not a skid steer, sorry.

NP thanks for the input

 

[3gunr]

my 2538 did thisabout a month ago , was brush hogging when it died , turns out the fuel i had just put in was bad. Had to drain entire fuelsystem and replace filters.