Block Heater Location on M4500

   / Block Heater Location on M4500 #1  

Jerry/MT

Elite Member
Joined
Feb 2, 2008
Messages
3,141
Location
North Idaho-The Palouse
Tractor
New Holland TD95D, Ford 4610 & Kubota M4500
Our M4500 has a rad hose heater on it and it's shot. I prefer a block heater to hose heaters but at first glance I don't see where it is to be installed. I have installed them in other tractors but I don't see a location for the S2600-A engine. However Kubota offers them for this model. they are 3/4" NPT and some engines use a 3/4" to 1" NPT bushing to adapt them.

Do any of you guys know where they are installed?
 
   / Block Heater Location on M4500
  • Thread Starter
#3  
Turns out the block heater goes in a core plug hole on the LH side of the block. A special NPT threaded tapered SS bushing is driven into the core plug hole and the block heater screws into that.
 
   / Block Heater Location on M4500 #4  
I clip one of those painters lights with a 60 watt bulb to the oil pan...

...thin/warm oil will insure you get enough 'spin' to start up when it's cold.

An incandescent bulb generates heat.
 

Tractor & Equipment Auctions

UNUSED FUTURE MINI SKID STEER STUMP GRINDER (A51244)
UNUSED FUTURE MINI...
UNUSED FUTURE 4 GAUGE 25' JUMPER CABLES (A51243)
UNUSED FUTURE 4...
SET OF HANG-ON PALLET FORKS (A51243)
SET OF HANG-ON...
1985 Chevy C8500 Auger/Derrick Truck (A50323)
1985 Chevy C8500...
Sudenga 10-72 Swing Away Auger (A50514)
Sudenga 10-72...
UNUSED CFG Industrial QK16R Mini Excavator (A47384)
UNUSED CFG...
 
Top