I recently bought a Ford 2600 with several attachments. The brush hog is older and I'm not able to identify the make/model. I sharpened the mower blades, but later realized the blade tips were laying back, rather than engaging with the grass. Any advice as to how to fix this?
Rotary Cutter Blade Tips
- Thread starter ECD
- Start date
- Views: 746
JimRB
Veteran Member
The brush mowers I have worked around rotate counterclockwise and viewed from the top of the deck. Little lawn mowers (21") rotate clockwise. Are you saying someone put the blades on backwards? Remove blades and install properly seems like it might be the answer. You can find owners manuals at Bushhog. The concepts of brush cutters do not vary between manufacturers. http://www.bushhog.com/uploads/documents/BHRazorbackBH4-5-6OM-14.pdf
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 32,246
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
On some models it's easy to put them on upside down. Don't even need to pay attention to direction of rotation. Just look at the angle of the sharpened edge. the cutting edge should be on the bottom of the blade, not the top as it would be if they are on upside down. Neighbor did that with his JD lawn mower several years ago. Brought it down for me to look at. He was very embarrassed when we discovered they were upside down. 
Only other thing that will cause "lazy" swinging blades it running the PTO too slow. The cut quality difference is obvious with only a couple hundred RPM difference.
Let us know what you discover.
Lastly, pictures say a thousand words.
Welcome to TBN.
Only other thing that will cause "lazy" swinging blades it running the PTO too slow. The cut quality difference is obvious with only a couple hundred RPM difference.
Let us know what you discover.
Lastly, pictures say a thousand words.
Welcome to TBN.