Best Box Blade

   / Best Box Blade #1  

Setteduke

New member
Joined
Feb 9, 2020
Messages
7
Location
Great Valley, NY
Tractor
Ford 2120 1995. Kubota 900UTV. Ford 555D 96
I bought a six foot box blade from TSC, I have a Ford 2120, after a few years I have had to replace multiple cat pins, both sides, keep bending them and the supports of the box blade are bent. I was looking at the King Cutter and the supports are solid steel. Looks a lot sturdier. I have a lot more work to get done. Don’t want to replace the CAT pins every time and maybe the supports. Get a better box blade or beat the s out of this one? What do you guys think? I have a lot of rocky soil. Thanks
 
   / Best Box Blade #2  
I bought a six foot box blade from TSC, I have a Ford 2120, after a few years I have had to replace multiple cat pins, both sides, keep bending them and the supports of the box blade are bent. I was looking at the King Cutter and the supports are solid steel. Looks a lot sturdier. I have a lot more work to get done. Don’t want to replace the CAT pins every time and maybe the supports. Get a better box blade or beat the s out of this one? What do you guys think? I have a lot of rocky soil. Thanks
Rocky soil can be real hard on box blade. I bent the top link on one of my tractors year ago on unyielding rocks. You might be best served fixing and patching the old one.
 
   / Best Box Blade #3  
If your pull/lift pin is mounted to a single arm with a pin that has a nut to hold it on, I would suggest adding a second pull arm and use a through pin. That way, you are pulling from 2 points on each side, rather than one.
Hope this makes sense.


Go to the 360 degree view. You can see what I'm talking about in the picture. You could run the extra arm all the way to the rear like the other.
 
   / Best Box Blade #5  
I have a 72" bush hog brand box blade that I have beat the crap out of in my rocky soil. Other than paint it still looks like the day I got it almost 20 years ago.
 
   / Best Box Blade #6  
I was going to order a TS one...but for a few hundred more the EA one would be much better.
 
   / Best Box Blade #7  
I bought a six foot box blade from TSC, I have a Ford 2120, after a few years I have had to replace multiple cat pins, both sides, keep bending them and the supports of the box blade are bent. I was looking at the King Cutter and the supports are solid steel. Looks a lot sturdier. I have a lot more work to get done. Don’t want to replace the CAT pins every time and maybe the supports. Get a better box blade or beat the s out of this one? What do you guys think? I have a lot of rocky soil. Thanks
Do you have the draft control engaged? If so, check if there is a lighter setting. That will enable it to lift instead of bending things.
 
 

Tractor & Equipment Auctions

2008 CATERPILLAR 304C CR EXCAVATOR (A51242)
2008 CATERPILLAR...
2006 Ford F-150 Pickup Truck (A48081)
2006 Ford F-150...
2018 Skyjack SJ1056TH 10,000lb 4x4 Rough Terrain Telehandler (A49461)
2018 Skyjack...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
2019 CHEVY 5500 CAB CHASSIS (A50505)
2019 CHEVY 5500...
NEW HOLLAND TS6.130 TRACTOR (A51406)
NEW HOLLAND...
 
Top