Snowblower Ber-Vac Snowblower

[wbilldonna]

I have aquired a Ber-Vac w0238d snow blower and i am haveing trouble finding out what tractors it will fit and what it is worth. It has never been used. Any help would be appreciated.

Thanks

Bill

 

[vettemanwight]

Well you need to tell us a bit more about it so we can say what power is needed for it. Also what kind of condition is it in. You said it has never been used, how long been sitting , has it been sitting outside. V

 

[wbilldonna]

I was told it was garage kept and bought for a wheel horse.There is no chipped paint or rust on the blower. The cut is 38" and is 2 stage. It is a heavy unit, i would think you would need a hydro lift and descent amount of hp. In the research i have done i can't find any info on this model.

Thanks

Bill

 

[brud1]

I was told it was garage kept and bought for a wheel horse.There is no chipped paint or rust on the blower. The cut is 38" and is 2 stage. It is a heavy unit, i would think you would need a hydro lift and descent amount of hp. In the research i have done i can't find any info on this model.

Thanks

Bill

I have the same model about to be worn out so I am interested. Are you anywhere near zip code 12306?

 

[brud1]

Am interested in your Wheelhorse unit. Shipping costs and problems could be substantial if your location is quite distant from Schenectady, NY

 

[brud1]

I was told it was garage kept and bought for a wheel horse.There is no chipped paint or rust on the blower. The cut is 38" and is 2 stage. It is a heavy unit, i would think you would need a hydro lift and descent amount of hp. In the research i have done i can't find any info on this model.

Thanks

Bill

Have same unit about worn out. Am interested in what you have.

 

[brud1]

Am interested in your Wheelhorse unit. Shipping costs and problems could be substantial if your location is quite distant from Schenectady, NY

This system is confusing and I"m not certain that you are getting my reply directly but I am interested in your snowblower. k_x@ieee.org

 

[brud1]

I was told it was garage kept and bought for a wheel horse.There is no chipped paint or rust on the blower. The cut is 38" and is 2 stage. It is a heavy unit, i would think you would need a hydro lift and descent amount of hp. In the research i have done i can't find any info on this model.

Thanks

Bill

Am interested in your unit. It is about 22 years old or more and was made for Wheel Horse before they were taken over by TORO. Would like to make a deal.
Brud1 k_x@ieee.org