Mowing Belly mower

laen46 · Jul 18, 2007

Is it possible to make an L2350 into a belly mower? If so, what would be needed?

wil3404 · Jul 18, 2007

Hey man anything is possible. First I'm guessing your tractor is a hydro. Next you need to figure out what type of deck you are supposed rc60-???, then you need to start hunting for your mounting hookup. You will need, 4 mounting brackets that mount to frame(most likely 4), you will need your 2 main hindging arms for both sides of the deck, next you will need your drive shaft(if you cannot find exact length always get longer( I can walk you through resizing and still having balanced straight shaft, you will need to find how the mower deck lifts, most seem to lift off of three point hitch, If this is your type- you will need to find a bracket that goes on the three point base and then the rod that connects it. I know it seems like a lot of work but it really isn't bad. I just converted my tractor and I have a feeling it was probably worse than this should be. You mainly need to ask yourself if this is worth the money and time. If it is no question than be prepared to spend about 1000 to 1500 maybe more it may depend on how much you do your self. any questions shoot me an email