Barn to workshop

[Larstan]

Finally get to augering and get about 2 feet down. Whoops, with the nose a little low on the tractor and the PHD settings 2 ft was as low as I got. Had to reset the top link, auger boom, and 3pt lower links.

Here is the start of the first try..... /forums/images/graemlins/laugh.gif

 

[Larstan]

first the top link all the way to the top....

 

[Larstan]

Boom support all the forword.....

 

[Larstan]

raised the lift link to the bottom hole.....

 

[Larstan]

Went back and tried again, soil on this side was remarkably easy to drill. The fence posts I had set before were quite alot more work as I hit wet clay about a foot down and it just gummed up the bit and sent it into an out of balance frenzy. Sank it to the cover, bit is 3 1/2 Ft long. /forums/images/graemlins/grin.gif

 

[Larstan]

Last pic tonight, pulled the bit, soil was pretty dry all the way down. Should, and I say should make for fairly straight forword work. I guess we shall see........ /forums/images/graemlins/cool.gif

 

[Gatorboy]

Not sure what the problem is, but the last several photos are not showing up. /forums/images/graemlins/confused.gif

 

[GerardC]

Same here. Can't get any to load. /forums/images/graemlins/confused.gif /forums/images/graemlins/smirk.gif

 

[Farwell]

I have tried several times over the morning and still have not been able to download the photos. I am having the same problem with a few other threads and thought the problem was mine. Guess it may be the TBN's problem. I can down load older photos on this thread. Strange.
Farwell

 

[Nasty135]

Larstan, Your going to have to reload your last batch of pictures due to a server "Glitch" I just did mine and now they work, click edit on your post to reload pics.... /forums/images/graemlins/wink.gif

Wow after posting all those pics , Ya have to do it again /forums/images/graemlins/frown.gif I guess that just kinda goes with the way your day started out...